630577

Akai MPC2500 Manual

110
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
100
Chapter 15: Effect
DELAY
This effect adds delay to the original sound.
Note : DELAY can be selected only in FX2.
Time field
You can set the delay time of the first delay sound.
If the Sq sync field is set to OFF, you can set it to the
maximum 999 msec. If the Sq sync field is set to
ON, you can set it with the Beat and the Tick.
Feedback field
You can set the feed back level from the output to
the effect input. The higher the value is, the more
the delay sounds are created.
HF damp field
You can set the quality of the delay sound (High Fre-
quency damp). If you set it to a lower value, it makes
the delay sound like a classic analog delay effect.
Level field
You can set the volume level of the delay sound.
Sq sync field (ON/OFF)
You can synchronize the delay sound to the tempo
of the sequence. . When it is set to ON, the display
in the Time field will change to Beat and Tick. For
example, if you set the Time field to “01.00”, the de-
lay time will be adjusted automatically to 1/4 notes.
Mode field (PAN/MONO)
This determines whether the delay will be mono
or stereo.
MONO : A standard monaural delay.
PAN : A Stereo panning delay that will pan the
delays from left to right.
Width field
You select the width of a stereo panning delay. The
higher this value is, the wider the delay sound is.
Pan field
You can set the pan position of the delay sound.
CHORUS and FLANGER
FLANGER adds modulated delay sounds to the origi-
nal sound to give a ringing effect to the sound.
Both CHORUS and FLANGER add modulated delay
sounds to the original sound to give a ringing effect to
the sound. The settings are the same for both effects.
Note : You can select CHORUS and FLANGER only in the FX2.
Slow sweep rate field
You can set the modulation speed here.
Slow sweep depth field
You can set the depth of the modulation here.
Vibrato rate field
You can set the detailed speed of the modulation here.
Vibrato depth field
You can set the detailed depth of the modulation here.
Feedback field
You can set the feed back level from the output to
the effect input. The effect will be boosted and cre-
ate a more unique sound.
L/R sweep sync field
If you set it to ON, the Sweep rate will be set at the
same cycle for both the Left and Right. If you set it
to OFF, the sweep rate of the right channel will be
set slightly higher than that of the left channel and
you can also create a more complicated effect.
… 110 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info