630577
107
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operator’s Manual rev 1.0
97
Chapter 15 : Effect
In this section, you will learn how to select and edit effects. The MPC2500 has two stereo effects and one master effect. To
apply the effects to a specific pad sound, use the two stereo effects. To apply effects to the entire sound, use the master effect.
Note :
The effect settings will be saved with the ALL file, which is created when you save the data by selecting SAVE ALL SEQS & SONGS.
Applying effects to a specific
pad sound
You can apply effects to the selected pad sound. Here, let’s
apply BIT GRUNGER to the selected pad sound.
01.
Press the [MODE] key and then the [PAD 12] (EFFECT).
The EFFECT mode will be displayed.
02. Press the [F1] (SELECT) key.
The SELECT page will be displayed.
03. Move the cursor to the FX1 type field and turn the
DATA wheel, or press the [WINDOW] key.
The Select Effect window will be displayed. You
can select the effect type by turning the DATA
wheel.
04.
Select BIT GRUNGER and press the [F5] (SELECT) key.
This closes the window and goes back to the SE-
LECT page.
BIT GRUNGER is selected in the FX1 type field.
05. Press the [MODE] key and then the [PAD 8] (MIXER)
to display the MIXER mode.
You select the pad for the effect in the MIXER mode.
06. Press the [F3] (FXSEND) key.
The FX SEND page will be displayed.
07. Hit the desired pad.
This pad will be selected and its display will be
highlighted.
08. Press the UP cursor key to select the FX Send field.
The FX Send field for the effect setting will be selected.
OF No effect will be applied to the pad.
1
The effect of the FX1 will be applied to the pad.
2
The effect of the FX2 will be applied to the pad.
Here, select 1.
When you hit the selected pad, the processed sound
will be played.
The effected sound will be output from the stereo out.
Tips : you can apply the effect to several pads. The effect of the FX
1 is applied to all the pads whose FX SEND are set to 1 In the FX
SEND page of the MIXER mode.
Tips :
you can set the effects in details. For more information about
detailed editing of each effect, see the “Editing effects” section.
Note :
You cannot apply the effects to the pads whose outputs are
NOT set to ST (stereo out) in the L/OUT page of the MIXER mode.
Like FX 1, you can use the effects of the FX 2 by select-
ing an effect in the FX2 type field of the SELECT page
in the MIXER mode and setting the FX SEND field to 2
in the FX SEND page of the MIXER mode.
Applying reverb
When you select Reverb in the FX type, you need to ap-
ply this effect to a specific pad in a slightly different way.
Here, assume you have selected REVERB in the FX2
type field.
01. Select REVERB in the FX2 type field and then select
the FX SEND page of the MIXER mode.
02. Hit the desired pad.
03. Press the up cursor key to select the FX SEND field
and select 2 in the field.
You cannot apply the reverb effect by just selecting
the FX SEND. To apply the effect, you need to ad-
just the signal level sent to the reverb in the send
level field.
04. To adjust the signal level sent to the reverb, press
the down cursor key and turn the DATA wheel.
This field is called the Send level field, and it dis-
plays the value as the bar. The larger the signal level
is, the greater the reverb effect becomes.
Tips : You can adjust the send level field to adjust the amount of
the reverb for each pad, individually.
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info