630577
104
Zoom out
Zoom in
Previous page
1/136
Next page
MPC2500 Operators Manual rev 1.0
94
Chapter 14: Mixer
Input Thru function
The MPC2500 can mix the incoming signal from REC IN or DIGITAL IN with the play back sound from the MPC2500. You
can also route the Input Thru signal to the internal Effects and two (2) Filters. You can control the level, pan, the cut off
frequency, the resonance, etc of incoming signal with the Q-Link sliders and knobs.
Applying effects to an
incoming signal
Note : In this explanation, some Effect should be selected first. If
you don’t select any Effect, select some Effect with referring to
“Chapter 15 : Effect”.
01. Press [INPUT THRU] key.
The INPUT page will be displayed.
You can also get to the INPUT page by pressing the
[F5] (INPUT) key in the MIXER mode.
02. In the Input thru field, select ON.
03. Set the following parameters.
Source field : You can select the input signal,
ANALOG or DIGITAL.
Mode field : You can select the input signal, ST
(Stereo), L (L channel) or R (Right
channel)
Level field : You can set the input level. If you
select ANALOG in the Source field,
adjust the [REC GAIN] volume
with using the level meter in the
RECORD mode in advance. If you
select DIGITAL in the Source field,
you cannot use the [REC GAIN]
volume.
Pan field : Note: This field will be displayed
only when you select L or R in the
Mode field. This will allow you to
set the pan position.
Out field : You can select the outputs of the in-
put thru signal, ST, 12, 34, 56, or 78.
In this example, select the “ST”. Re-
member, you can only route the In-
put Thru signal to the internal FX if
you choose ST as an output.
FX field :
You can select the effect of the input
thru signal. OF (Off), 1 (Effect 1) or 2
(Effect 2). If you select OF, the input
thru signal is not applied any effect.
In this example, select the “1” or “2”.
Send field : You can set the effect send level of
the Input thru signal. This field will
be displayed only when the Effect
is selected to REVERB or DELAY in
the FX field.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC2500 in the language / languages: English as an attachment in your email.

The manual is 12,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPC2500

Akai MPC2500 Quick start guide - English, German, French, Italian, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info