630535
16
Zoom out
Zoom in
Previous page
1/49
Next page
16
CC (Continuous Controller): The breath sensor will send a MIDI Continuous
Controller (CC) message. If you select this, press the Trans Button to set additional
message parameters:
o En (Enable): This determines whether CC output is enabled or disabled. If you
select this, press and hold the Trans Button, and press the Hold Button or
Interval Button to turn it on (On) or off (OF). When it is on, a dot will appear in
the display.
o Cn (Controller Number): This is the CC number that will be sent when you
blow into the mouthpiece. Use the Hold Button or Interval Button to set the
CC number (01127; values over 99 will be shown as the last two digits with a
dot between them). Match this number to the CC number of the parameter you
want to control.
Important: We recommend setting En to off (OF) before changing this
parameter to prevent accidentally muting the EWI5000's output while moving
through CC #7 (Volume).
o nb (No Breath): The value that will be sent with the CC message when you are
not blowing into the mouthpiece. Use the Hold Button or Interval Button to
set the value (00127; values over 99 will be shown as the last two digits with a
dot between them).
o br (Breath): The value that will be sent with the CC message when you are
blowing into the mouthpiece. Use the Hold Button or Interval Button to set
the value (00127; values over 99 will be shown as the last two digits with a dot
between them).
LV (Lock Velocity): When this is on, the breath sensor will not affect velocity; all
Note On messages will be sent with a fixed velocity. Press the Trans Button to turn
it on or off. When it is on, a dot will appear in the display.
To set the velocity, press and hold the Trans Button, and then use the Hold Button
or Interval Button to set the value (01127; values over 99 will be shown as the last
two digits with a dot between them).
Ct (Capture Delay): This determines how much delay there is between the moment
you blow into the mouthpiece and the Note On message is sent. Press and hold the
Trans Button, and then use the Hold Button or Interval Button to set the amount
(0110).
CS (Constant Output): When this is on, the breath sensor send breath messages
with a fixed value, which you can set by turning the Breath Parameter Knob. Press
the Trans Button to turn it on or off. When it is on, a dot will appear in the display.
4. To return to Performance Mode, press the Setup Button until the display is blank.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info