630535
15
Zoom out
Zoom in
Previous page
1/49
Next page
15
Breath Sensor
The mouthpiece's breath sensor translates the strength of your breath into the volume and
character of the note you're playing. It's important to set the sensor's sensitivity so it suits
your playing style.
Tip: If this is your first time using the EWI5000, you may want use a "lighter" breath sensor
setting for easier blowing. With practice, you can set this control at a "heavier" setting for a
more expressive performance.
To adjust the breath sensor:
1. Press and hold the Setup Button to enter Setup Mode.
2. Press the Hold Button or Interval Button to scroll through the options until bS (Breath
Sensor) appears in the display.
3. Release the Setup Button. The display will show the current mode. Use the Hold Button
or Interval Button to select any of the following options:
vo (Volume): The breath sensor will send its messages using CC #7 and CC #39,
which are both Channel Volume. If you select this, press and hold the Trans Button
to set additional parameters:
o OF (Off): No messages will be sent using CC #7 or CC #39.
o Lr (Low-Resolution): Messages will be sent using only CC #7.
o Hr (High-Resolution): Messages will be sent using both CC #7 and CC #39.
(An additional message will be sent using CC #88 before each Note On
message except when the velocity is locked.)
EP (Expression): The breath sensor will send its messages using CC #11 and CC
#43, which are both Expression. If you select this, press and hold the Trans Button
to set additional parameters:
o OF (Off): No messages will be sent using CC #11 or CC #43.
o Lr (Low-Resolution): Messages will be sent using only CC #11.
o Hr (High-Resolution): Messages will be sent using both CC #11 and CC #43
.
(An additional message will be sent using CC #88 before each Note On
message except when the velocity is locked.)
PP (Aftertouch): The breath sensor will send aftertouch (polyphonic pressure)
messages. If you select this, press the Trans Button to turn it on or off. When it is
on, a dot will appear in the display.
CP (Channel Pressure): The breath sensor will send channel pressure messages. If
you select this, press the Trans Button to turn it on or off. When it is on, a dot will
appear in the display.
br (Breath): The breath sensor will send its messages using CC #2 and CC #34,
which are both Breath. If you select this, press and hold the Trans Button to set
additional parameters:
o OF (Off): No messages will be sent using CC #2 or CC #34.
o Lr (Low-Resolution): Messages will be sent using only CC #2.
o Hr (High-Resolution): Messages will be sent using both CC #2 and CC #34.
(An additional message will be sent using CC #88 before each Note On
message except when the velocity is fixed.)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info