Manual Akai E2 HeadRush (page 10 of 14) (English)

630570

Zoom out

Zoom in

1/14

Application

Change the number of Heads

If you connect a plug to any head (HEAD 1 - 4),

the delay sound of the HEAD does not get

routed through the MIX output. For example, if

you connect the plugs to HEAD 3 & 4, only the

delay sound from HEAD 1 & 2 gets routed

through the MIX output.

So you can mute unnecessary delay sounds

by connecting plugs to the HEADs.

Sound on Sound

This allows you to mix the direct signal (your playing sound) and the delay signal, create a harmony part, and add

your solo and your backing sounds to the mix.

Example setting

1. Turn the FEEDBACK, HF DAMP, HEAD GAP, and RATIO fully counter-clockwise.

2. Set the LEVEL to the maximum position by turning it fully clockwise.

3. Select the number of Heads.

E.g. In the case you want to get the delay sounds with one beat later, if you use only HEAD 1-3, you can

get just the delay of one bar. (4 beats). In this case, you should connect a plug to HEAD 4 and mute the

delay sound of HEAD 4.

4. Set the delay time by tapping the right Footswitch so the delay time matches the rhythm.

5. Turn the effect ON by tapping the left Footswitch and play your guitar. You can get three separate delay

sounds after you play.

Sending out separate delay sound and direct sound using multiple amplifiers.

This allows the delay sounds and the direct sound to sound separately by connecting the MIX output and HEAD

1-4 outputs to each amplifier.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Akai E2 HeadRush in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Akai E2 HeadRush Manual

Product: