630570
9
Zoom out
Zoom in
Previous page
1/14
Next page
TAPE ECHO mode
Basic Operation
1. Select TAPE ECHO mode by pressing the
MODE SELECT switch.
Note: You can also change the mode by
pressing the two Footswitches simultaneously.
2. Set the delay time by tapping the right
Footswitch (TAP TEMPO) twice.
The delay time is calculated based on the
tempo of the two taps. The right red LED (TAP
TEMPO) flashes in time with the delay time.
The maximum delay time is 5.9 seconds.
3. Tap the left Footswitch (ON/OFF), and the left
green LED (ON/OFF) lights, indicating the
effect is on. Tap it again and the effect is off.
Hint: You can change the delay time by tapping the right Footswitch while the effect is on.
Fine setting
In the TAPE ECHO mode, only the controls with blue lettering can be used.
LEVEL : Adjusts the output level of the effect sound.
HF DAMP : Decreases the amount of high frequency in the effect sound. Turning it to the right decreases the
amount of high frequency and makes the sound like a classic analog delay effect.
FEEDBACK : Adjusts the amount of feedback in the delay sound (Adjusts the number of repeats.) Turning it to
the right increases the number of repeats.
TIME : Adjusts the delay time. Use this to adjust shorter delay times that are difficult to set by tapping
the Footswitch. The range of the delay time available with this control is between 10 ms and 1.45
seconds. Use the Footswitch if you want to set delay times longer than 1.45 seconds.
RATIO : Adjusts the output ratio of the four Heads. Turning it to the left makes the output ratio of the four
Heads equal, turning it to the right sets it so the output level of HEAD 1 remains high and HEAD
2-4 gradually decrease in level.
HEAD GAP : Adjusts the interval between the four virtual Heads. Turning it to the left creates the same interval
between each of the four Heads, turning it to the right creates a different interval between each of
the four Heads. Using a combination of HEAD GAP, FEEDBACK, and RATIO adjustments it's
possible to get a Random Delay Effect.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai E2 HeadRush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai E2 HeadRush in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info