48841
32
Zoom out
Zoom in
Previous page
1/98
Next page
32
ENGLISH
CD/CD-R/CD-RW GUIDE MESSAGES
Cause
Nothing is recorded on the disc.
Recording on a CD-R or CD-RW is finished.
The disc is damaged by scratches.
The TOC data is not proper.
Error concerning CD-R or CD-RW occurred.
Dubbing is prohibited by the SCMS standard.
Finalization, erasing or unfinalization is not
finished within the unit-set time and so the unit is
retrying the process.
Mechanical or electrical error occurred in the unit.
There is no disc loaded.
Input digital signal cannot be received.
There is not enough time left to be recorded on
the disc.
The CD-R approaches the OPC limit (page 12).
The disc reached or exceeded the OPC limit, or
the disc is damaged and so OPC process failed.
The erasing process failed.
More than 99 tracks are trying to be recorded on a
single disc.
Mechanical error occurred. (A disc may be
unable to be removed.)
Solution
Wait until the message disappears.
Clean the disc or replace the disc.
Replace the disc or erase all tracks.
Wait until the message disappears.
Press POWER to turn the unit off and then press it
again to turn the unit back on.
If the message is still on, consult your local AIWA
dealer.
Load a disc.
Plug in porperly with an optical cable.
Replace the disc with another recordable disc. For
a CD-RW, remaining recordable time can be
increased by erasing tracks.
Finalize the CD-R.
The disc can be played. To record, replace the disc
with another one.
Try again. If last track erasing fails, try all track
erasing.
Replace the disc with another one. For a CD-RW,
erasing tracks is also possible.
Turn the unit off, then turn it back on, and try to
remove the disc. If you still cannot remove the
disc, consult your local AIWA dealer.
Message
Blank Disc
UP DATE
Check Disc
Disc Err
Can't Copy
WAIT
SYS ERROR
No Disc
No Signal
Disc Full
OPC Full
OPC ERROR
ERASE Err
Track Full
Mecha Err
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa XR-MR5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-MR5 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info