793980

Aiwa RMD-99ST Manual

7
Zoom out
Zoom in
Previous page
1/80
Next page
en 12
13
TUNE INTO STATIONS
Press the POWER ON/OFF button to turn on your radio, then select your desired band
by pressing the FM, AM, SW ( ) or ( ) button. Now, you can turn into your favorite
stations with any of the following tuning methods:
METHOD 1: ETM (EASY TUNING MODE)
ETM skillfully combines a reception circuit of high quality and high precision dial
for easy tuning radio stations.
Using ETM to auto tune and store all available stations into a temporary memory
without eecting ATS nor regular memories, please follow below steps:
1. Press the ETM button to
enter on Easy Tuning Mode.
The display will show the
word ETM.
2. Select your desired band by
pressing on the FM/AM/SW
button, then press and hold
the ETM button until the auto
scan starts.
The auto scan function will
store all the avalible stations
in the ETM memory.
3. When the auto scan has
stoped the searching, turn
the TUNING KNOB to select
those recently stored stations.
Notes:
• While operating ETM to search for stations, a few stations might be missed if there
is interference in the surrounding. In this case, you can simply key-in the frequency,
then press the ETM button to manually store it into the ETM memory.
TIPS TO IMPROVE RECEPTION
A. For FM stations:
When you are in a dierent city or country, you should perform the ETM function again
instead of using ATS function, because this will not delete any of the stations already
stored within the memory.
B. For MW stations:
We highly recommend to perform the ETM function again during night time, as many
stations start broadcasting at night.
C. For SW stations:
It is recommendable to perform the ETM function in the morning, afternoon as well as
night time, because the transmitting signal of SW is very unstable and usually there are
more stations that start broadcasting in the late afternoon.
TUNE INTO STATIONS
METHOD 4: DIRECT KEYPAD ENTRY
To search for a frequency, turn on the radio and press the VF button to switch into
frequency mode, press the numeric keys 0-9 to enter the station frequency directly.
To search for those stored stations, press the VM button to switch into memory
mode, then press the numeric keys 0-9 to enter the preset memory number directly.
METHOD 3: AUTO BROWSE STATIONS
1. Turn on the radio and press
the VF button to switch into
frequency mode.
2. Press and hold the VF button
until the FAST TUNING speed
mode “” starts scanning
from one station to another,
staying on each station for
about 5 seconds.
3. To stop the auto browse
function, simply press the VF
button again.
Notes:
• While operating the Auto-browse Station function, you can press the M button
anytime to store the current station in the memory; the unit will keep on auto
browsing the next available station afterwards.
• Ignore the decimal point for FM band when inputting the frequency numbers.
For example, FM 89.3 MHz, just enter 8 9 3.
• If the entered frequency is not within the covering area,the display will show the
“Err” (error) symbol.
METHOD 2: MANUAL TUNING
A. Frequency searching:
Press the VF button to switch into
frequency mode, and then rotate
the TUNING KNOB knob to select
your desired station.
B. Memory searching:
Press the VM button to switch into memory mode, and then rotate the TUNING KNOB
to select those stored stations.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa RMD-99ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa RMD-99ST in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info