Manual Aiwa RMD-77 (page 12 of 74) (English, German, French, Italian, Portuguese, Spanish)

793979

Zoom out

Zoom in

1/74

en 22

FM/SW RECEPTION

Plug in the external wire antenna to the FM & SW ANTENNA jack of this radio, and

then hang its end outside the window for better reception of FM and SW.

HOW TO IMPROVE FM / SW RECEPTION

Note:

• When installing an outside antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with them might be fatal.

1 . Batteries must be inserted correctly in accordance with the polarity marks

to avoid damage to the radio.

2. If the batteries haven’t been changed in a long time period, the clock of the

radio will stop working. However, the pre-stored frequencies are still kept.

The clock will work again after new batteries are re-installed.

3. When the battery power is low, the “ ” symbol on the display will ﬂash

advising you to replace the exhausted batteries for new ones.

The radio will turn o automatically when the battery power isn’t enough.

4. Mixing used and new batteries may cause damage to the radio and also display

the power capacity incorrectly.

5. Remove the batteries from the battery compartment, if the radio is not

going to be used for a long period of time.

This will prevent the leakage of batteries that may can damage the radio.

USING BATTERIES

Window

FM & SW Antenna

Wire antenna

External wall

If a fault occurs, ﬁrst check the points listed below before taking the speaker to repair.

Do not open the radio as there is a risk of electric shock.

SYMPTOM CAUSE CORRECTION

General

Not able to turn on

the radio.

Radio malfunction.

Radio auto turns o

while listening.

Exhausted batteries. Replace the old batteries with

new ones.

Batteries installed incorrectly. Re-install the batteries

according to the polarity marks.

POWER button is locked. Press the button to unlock.

This may be caused by

interference, and the computer

microchip does not function

properly.

Batteries have no power.

Sleep timer is activated.

Remove and install the batteries

again.

If the radio still doesn’t work,

please contact your nearest

dealer for customer service.

Replace all the batteries.

Turn on the radio again.

Listening to the radio

The radio cannot

store some ATS

stations.

Weak frequency signal. Try to search the station

manually.

Some stations are

being stored with

noise using ATS.

There is interference nearby. Relocate the antenna or move

the unit to another location.

Only limited FM

stations can be

received in Japan.

FM frequency is 76~90MHz for

Japan.

Turn the radio o and press and

hold the [FM SET] button to

select FM frequency range.

Poor AM reception

in USA.

USA uses 10kHz tuning step

for AM.

Turn o the radio, repeatedly

press and hold the [9/10kHz]

button to select 10kHz.

When the alarm is

activated (alarm

by radio), there is

only noise with the

broadcast.

Maybe you did not set the

proper radio alarm station.

Preset your alarm station

properly.

There is no broadcasting at

that radio station.

Make sure there is a radio

broadcast in your location.

You are in another area where

there is no radio station for

your preset frequency.

Or set the alarm by buzzer.

TROUBLE SHOOTING GUIDE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa RMD-77 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6.78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa RMD-77 Manual

Product: