793979
11
Zoom out
Zoom in
Previous page
1/74
Next page
en 20
21
SYSTEM SETTINGS CHARGING FUNCTION
CHARGING FUNCTION
In radio o mode, press and hold the [FM SET] button until 87.5-108MHz, 64-
108MHz, 76-108MHz, or 87-108MHz appears on the display. Quickly keep
pressing on the [FM SET] button to select a suitable frequency range for your
local FM.
With radio o, press and hold [9/10kHz] button until 9kHzor 10kHz appears on
the display to select your desired AM tuning step.
With radio o, press and hold [MW/ LW] button until LW ON or LW OFF appears
on the display to turn ON or OFF the LW respectively.
With radio o, press and hold the [BEEP ON/OFF] button until “ON” or “OFF
appears in the display to activate or deactivate the key tone respectively.
When the AM tuning step is 10 kHz, the temperature displays will auto switch to
Fahrenheit ºF. When the AM tuning step is 9 kHz, the temperature displays will auto
switch to Celsius ºC.
With radio o, press and hold the [ ] key until CHA ON and NI-MH BATTERY
show on the display to activate the consumption display of rechargeable batteries
and the built-in charging system.
Press and hold the [ ] key until CHA OFF shows up and NI-MH BATTERY
disappears to activate the consumption display of regular batteries and turn o
the built-in charging function.
With radio off, install 3 x AA
(LR06) rechargeable batteries,
then press and hold the [ ] key until
CHA ON and NI-MH BATTERY
displays to activate the built-in
charging function.
Use the 5V external adaptor with
USB plug to connect with the radio.
The symbol will advance from
the bottom to the top during power
charging. It stops when the batteries
are fully charged.
SETTING THE FM FREQUENCY RANGE
SETTING MW(AM) TUNING STEP
TURN ON/OFF THE LW
MUTE/UNMUTE THE KEY TONE
TEMPERATURE
TURN ON/OFF THE CHARGING FUNCTION
INTELLIGENT CHARGING FUNCTION
Notes:
The default setting of this radio is to use regular batteries for power supply. In case
of using rechargeable batteries, you should switch the radio system to rechargeable
batteries mode in order to show the correct power capacity.
Use all the power of the rechargeable batteries before charging again. This method
could extend the life of the batteries and keep them in good condition.
Three batteries should be used as a group and should never be applied for another use.
Also, do not mix batteries with dierent power capacity to avoid damaging the radio.
Never attempt to charge a non-rechargeable battery in the radio, this will damage
your radio and could be dangerous.
Connect 5V external adaptor with USB plug.
FM STEREO & BANDWIDTH
While listening to FM stereo stations, press the [FM ST.] button, the “ ” indicator
will appear on the screen to activate the STEREO listening mode.
If the received FM transmission signal is too weak, it is recommended to deactivate
the stereo function by pressing the [FM ST.] button again.
FM ST. (FM STEREO)
Note:
The stereo function will not be activated if the FM station is not stereo broadcasting.
Repeat pressing the [AM BW] button to select your desired 6, 4, 3, 2, 1 kHz bandwidth.
Wide band:
It has better audio fidelity when receiving strong signals or local stations.
Narrow band:
It is suitable to receive weak and long distant stations as narrow band is able to
limit the interference from adjacent strong signal and reduce background noise.
AM BW (BANDWIDTH)
FM & SW
ANTENNA
DC-IN 5V
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa RMD-77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa RMD-77 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info