793979

Aiwa RMD-77 Manual

7
Zoom out
Zoom in
Previous page
1/74
Next page
en 12
13
TUNE INTO STATIONS TUNE INTO STATIONS
METHOD 4: DIRECT KEYPAD ENTRY
To search for a frequency, turn on the radio and press the VM/VF button to switch into
frequency mode, press the numeric keys 0-9 to enter the station frequency directly.
To search for those stored stations, press the VM/VM button to switch into memory
mode, then press the numeric keys 0-9 to enter the preset memory number directly.
METHOD 3: AUTO BROWSE STATIONS
1. Turn on the radio and press
the VM/VF button to switch
into frequency mode.
2. Press and hold the VM/VF
button until the FAST TUNING
speed mode “” starts
scanning from one station
to another, staying on each
station for about 5 seconds.
3. To stop the auto browse
function, simply press the
VM/VF button again.
Note:
• While operating ETM to search for stations, a few stations might be missed if there
is interference in the surrounding. In this case, you can simply key-in the frequency,
then press the ETM button to manually store it into the ETM memory.
Notes:
• Ignore the decimal point for FM band when inputting the frequency numbers.
For example, FM 89.3 MHz, just enter 8 9 3.
• If the entered frequency is not within the covering area,the display would display
“Err” (error) symbol.
Note:
• While operating the Auto-browse Station function, you can press the M button
anytime to store the current station into memory; the unit will keep on auto
browsing the next available station afterwards.
TIPS TO IMPROVE RECEPTION
A. For FM stations:
When you are in a dierent city or country, you should perform the ETM function again
instead of using ATS function, because this will not delete any of the stations already
stored within the memory.
B. For MW stations:
We highly recommend to perform the ETM function again during night time, as many
stations start broadcasting at night.
C. For SW stations:
It is recommendable to perform the ETM function in the morning, afternoon as well as
night time, because the transmitting signal of SW is very unstable and usually there are
more stations that start broadcasting in the late afternoon.
METHOD 2: MANUAL TUNING
A. Frequency searching:
Press the VF/VM button to switch
into frequency mode, and then
rotate the TUNING KNOB knob to
select your desired station.
B. Memory searching:
Press the VM/VF button to switch into memory mode, “VM” will appear on screen.
Then rotate the TUNING KNOB to select those stored stations.
USING THE STORED STATIONS
There’s a total of 550 preset memories within the unit. 100 preset memories for each
FM, MW, and LW band, and 250 for SW.
METHOD 1: ATS (AUTO TUNING STORAGE)
1. Fully extend the telescopic
antenna and then press the
FM button to select FM band.
2. Press and hold the FM button,
until the word “PRESET ”
appears flashing on screen
on screen and the frequency
starts advancing; now the
radio will start scanning and
storing all the avalible radio
stations into the memory.
When the frequency stops, it
means that the ATS operation
is already done. Then you can
rotate the TUNING KNOB to
search for those stored stations.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa RMD-77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa RMD-77 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info