793979

Aiwa RMD-77 Manual

6
Zoom out
Zoom in
Previous page
1/74
Next page
en 10
11
TURNING ON THE RADIO
Press POWER ON/OFF button to
power on the unit (the display will
bright blue, and the word ON will
appear); press it again to power
OFF (standby mode) the radio (the
display will bright blue, and the
word “OFF” will appear).
KEY LOCK FUNCTION
Press and hold the DISPLAY /
button for two seconds to set the
key lock function.
Once the key lock function is
enabled, the keyboard of the radio
will be lock.
To disable the key lock function,
press and hold for two seconds
the DISPLAY / button.
Batteries must be inserted correctly to avoid damage to the radio. Always remove the
batteries when the radio will not be used for a long period of time, as this will cause
leakage to the batteries and subsequently damage to your device.
BATTERY INSTALLATION
Slide out cover and install
3 AA TYPE batteries in
the numbered order,
making sure to match the
polarity markings inside
the compartment.
BATTERY INSTALLATION
BASIC OPERATION
Note:
• Make sure that the batteries had been installed over the ribbon inside the compartment.
When the batteries need to be replaced, pull the ribbon to remove the batteries
easily from the compartment.
Note:
• The bottom of the antenna can be rotated and stretched.
Note:
• If you are unable to turn on the radio, please check that the batteries were installed
correctly, the battery capacity is sucient and the lock function has not been turned on.
USING THE ANTENNA
TIPS TO IMPROVE RECEPTION
A. For FM/SW broadcasting:
In case of receiving FM/SW broadcasting, fully extend the telescopic antenna, and
adjust its length and direction to get a better reception.
B. For MW/LW broadcasting:
There is magnetic antenna inside the radio. When receiving MW and LW broadcasting,
rotate the radio or change its location to achieve optimum reception.
0kHz DISPLAY
[ ]
DISPLAY
POWER
TUNE INTO STATIONS
Press the POWER ON/OFF button to turn on your radio, then select your desired
band by pressing the FM, M W/LW , SW ( ) or ( ) button. Now, you can turn into your
favorite stations with any of the following tuning methods:
METHOD 1: ETM (EASY TUNING MODE)
ETM skillfully combines a reception circuit of high quality and high precision dial
for easy tuning radio stations.
Using ETM to auto tune and store all available stations into a temporary memory
without eecting ATS nor regular memories, please follow below steps:
1. Press the ETM button to
enter on Easy Tuning Mode.
The display will show the
word ETM.
2. Select your desired band, then
press and hold the ETM button
until the auto scan starts.
The auto scan function will
store all the avalible stations
in the ETM memory.
3. When the auto scan has
stoped the searching, turn
the TUNING KNOB to select
those recently stored stations.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa RMD-77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa RMD-77 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info