371062
9
Zoom out
Zoom in
Previous page
1/42
Next page
ENGLISH
9
En
REMOTE CONTROL
INSERTING BATTERIES
Open the battery cover on the rear and insert two R03 (size AAA)
batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 ft.). When this distance decreases, replace the batteries with
new ones.
NOTE
If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
OPERATING OTHER EQUIPMENT
You can set the remote control to operate other equipment by
inputting the brand code.
Setting the brand code
1Turn on the equipment to be set.
2 Hold down the corresponding source button ( VIDEO 1, VIDEO
2, TV, CABLE/SAT.) and press 0-9 to input the three-digit
brand code. (Brand code is shown at the end of the operating
instructions.)
3 Release the corresponding source button.
The setting is completed.
Operating other equipment
Press the corresponding source button. The remote control goes
to the corresponding source mode. 0-9, TV/VIDEO, TV CH N
M, TV VOL +- and POWER etc., are available.
Pressing POWER again within 3 seconds turns this unit of f even
when the remote control is the corresponding source mode.
When operating this unit , press DVD/CD or TUNER/BAND.
NOTE
This remote control may not correspond to all models of the
brand shown at the end of the operating instructions.
When the batteries are removed from the remote control, all
settings stored in memory may be lost.
Some buttons on the remote control may not work exactly .
PARTS AND CONTROLS
MAIN UNIT
1 POWER 6STANDBY/ON
Turns the unit on and of f (standby).
2 zOPEN/CLOSE
Opens and closes the disc tray .
3 PHONES jack
Plug in here an optional headphones set with a stereo mini
plug (ø 3.5mm,
5
/32 in.). Speaker output is canceled.
4 SURROUND
Selects a listening mode.
BASS/TREBLE
Adjusts the bass/treble level.
SLEEP
Enters sleep-timer setting mode.
BAND
Selects the radio band.
5 FUNCTION
Selects DVD/CD, FM (AM), VIDEO 1 (ANALOG), VIDEO 1
(DIGITAL), VIDEO 2 (ANALOG) or VIDEO 2 (DIGIT AL)
function.
6 cPRESET
Disc: starts playback.
Radio: switches between tuning mode and preset mode.
sCLEAR
Disc: stops playback.
Radio: clears a station preset.
aSET
Disc: pauses playback.
Radio: stores the received station to preset.
fr TUNING-, gt TUNING+
Disc: skips to a previous or a succeeding chapter/track when
pressed, searches a chapter/track in fast forward or fast
reverse playback when held down.
Radio:manually tunes down or up within the band (tuning
mode). Selects the preset channel (preset mode).
PREPARATIONS
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa ht dv 90 mp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa ht dv 90 mp in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info