496579
28
Zoom out
Zoom in
Previous page
1/92
Next page
OUT
Refer to the operating instructions of the connected equipment
for details.
The connecting cords are not supplied. Obtain the necessary
connecting cords.
Consult your local Aiwa dealer for optional equipment.
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(DVD player, turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to VIDEO/AUX R jack, and the white plug
to VIDEO/AUX L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
.,,.,=*,*,,g*g**3,,&Qq*%,% M4,m, w\,#*m~**,,,*:~ :,%~,~..,. b,.* ,,, . . . ..)w..wm,.m.,,& .bT*b~,w@@*@,,. h,.h, ,3,ga*>% .x= ., ,“”
-.%...s..,<.,...,...
MD JACKS
This jack is recommended to connect with an MD player.
Use a cable with RCA phono plugs.
Connect the red plug to MD R jack, and the white plug to MD L
jack.
,..+,.,,..... .!......4..)..~,.,,.:,%”,.*,.<,.,.*.,.,b,m,.,.i,,.,., *.. ... . .,.....
--A,,-,,,. .,.,m#m.... ...... “,--- “- ~“~‘““~’”’-- “->--*PrJ,.-:!,”,!?-
“.”
, , -.,..,,.,&...........
LINE OUT JACKS
This unit can output analog sound signal through these jacks,
Use a cable with RCA phono plugs to connect audio equipment
with LINE IN (analog input) jacks.
Connect the red plug of a cable to LINE OUT R jack, and the
white plug to LINE
OUT L jack.
m
Do not connect an equipment to LINE OUT jacks and VIDEO/
AUX jacks simultaneously, Otherwise, noise is generated and
malfunction occurs.
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.),
Remove the dust cap @ from CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to CD DIGITAL
OUT
(OPTICAL)
jack.
Connect an optional powered sub woofer with built-in-amplifier
to the jack.
g<,:,:$~g=:~~$j,,-=:,;;.s g“%..: !~=!.{.w4,,.**@ a,*&r&,*-As*sw.% P_.!* w&Ywa ,Wr...s>m-. .,.+.._
,.t..!-Hww-#sma,4 **,g~*~*~,x
5.1 CH INPUT JACKS
This unit can input sound signals from the audio equipment (DVD
player, LD player, etc.) that contains a Dolby Digital decoder
with the 5.1 ch output terminals. Refer to “CONNECTING A DVD
PLAYER on page 28,
POWER
To play a equipment connected to VI DEO/AUX jacks or MD jacks
proceed as follows.
1 Press VIDEO/AUX/5.l CH or MD.
To play the eaui~ment connected to VIDEO/AUX, press
VIDEO/AUX/5.l CH. “VIDEO appears on the display.
To play the equipment connected to MD, press MD. “MD”
appears on the display.
2
Play the connected equipment.
To change a source name in the display
When VIDEO/ALfX/5.l CH is pressed, “VIDEO is displayed
initially. It can be changed to “AUX or “TV.
With the power on, press POWER while pressing l/[ DEO/Al.fx/
5.1 CH.
Repeat the procedure to select one of the names.
To adjust the sound level of the external source
When the sound level of the external source is much higher or
much lower than that of other function sources, adjust it as
follows.
1 Press VIDEO/AUX/5.l CH or MD and play the equipment.
2 Press + or -so that the sound level becomes the same
as that of other function sources.
m
During recording, the sound level can not be adjusted.
When CD DIGITAL OUT (OPTICAL) jack is not being used
Attach the supplied dust cap.
27 ENGLISH
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa CX-NMT720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa CX-NMT720 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info