Manual Aiwa BBTU-300 (page 7 of 51) (English, German, French, Italian, Portuguese, Spanish)

793941

Zoom out

Zoom in

1/51

en 12

USB MODE

PLAYING MUSIC VIA USB

This boombox has been developed using

the latest technical advances in the USB

field. However, given the wide range of USB

storage device types that are currently in the

market, we unfortunately cannot guarantee

full compatibility with all of them. For this

reason, in rare cases, there may be problems

playing files from some USB storage devices.

This is not due to device malfunction.

1. Slide the MODE switch to the CD-USB-

BT-AUX position to turn on the unit.

2. Press and hold the USB/BT/ button

until the “USb”, USB MODE INDICATOR

appears flashing on the left of the display.

3. Connect a USB storage device directly

to the USB/MP3 port. The display briefly

shows the number of folders and then

the total number of tracks. Playback will

automatically start after a few seconds.

4. To temporarily stop playback, press the

button, and press it again to resume

playback.

5. Press the or buttons to select a

different track number.

Press and hold the or buttons to ﬁnd

a speciﬁc passage within the track and

release it at the point you want to listen to.

6. Press the button to stop playing.

Notes:

• If the USB is not compatible, or there is

no USB storage device connected, the

display will show the word “NO”.

• Because some storage devices have a

large capacity, USB access time is a little

longer.

• If the playlist reaches the maximum

number of tracks the display will show

the word "FUL" (FULL).

• Switch the device to a dierent operating

mode before you remove the USB storage

device.

• To avoid damaging the boombox or other

devices, do not try to charge any external

device using the USB port.

CREATING A USB PLAYLIST

The Program feature may be used to program

up to 99 tracks for the USB mode too, in a

programmable playlist.

1. While in stop mode only (no USB playback),

press PROG, and the LCD display will show

the wording “P01” and the “PROGRAM”

indicator.

2. Press the or buttons to allocate the

desired track.

3. Press the PROG button to select and store

the track into the memory.

The program sequence will change to

“P02” to choose the next track.

4. Repeat steps 2 and 3 to select up to 99 tracks.

Once the last track has been added, the

LCD display will automatically show the

programmed tracks one by one, starting

with the first one that was programmed.

If you want to create a playlist with less

than 99 tracks, press twice the PROG

button after conﬁrming your last track.

5. To play the selected tracks (in the program

mode), press the button.

6. Press the button to hear the previous

programmed track or press to hear the

next programmed track.

7. To clear the programmed tracks from the

memory, press the button twice or change

to another function mode.

LISTEN TO YOUR TRACKS REPEATEDLY

Press the REPEAT button on the front panel

repeatedly to activate the REPEAT FUNCTIONS

in the following order:

1. *FLASHING (repeat the current track)

2. FOLDER (repeat all the tracks of

the current USB folder)

3. (repeat all the available tracks)

4. RANDOM (play randomly all the tracks

in the USB)

5. OFF (cancel the repeat/random function)

BLUETOOTH MODE

BLUETOOTH PAIRING

Prior to using the Bluetooth function, your boombox should be paired ﬁrst with your Bluetooth

device. (“Pairing” means establishing connection between Bluetooth devices such as mobile phones,

tablets, pc, etc).

1. Slide the MODE switch to the CD-USB-BT-

AUX position.

(fig. 1)

2. Press and hold the USB/BT/ button

until the “bt” (Bluetooth) function mode

appears on the display.

(fig. 2)

3. In Bluetooth mode, a voice prompt will

announce Bluetooth pairing mode.

The BLUETOOTH MODE LED INDICATOR

will start ﬂashing in blue.

And the boombox will search automatically

for Bluetooth devices.

4. Turn on the Bluetooth function on your

device and make it visible (see your

device's instructions to add or setup a

Bluetooth device).

5. Search for Bluetooth devices and select

AIWA BBTU-300

Enter the code “0000” if needed.

(fig. 3)

If the devices are paired successfully, the

BLUETOOTH MODE LED INDICATOR will

keep bright, and a prompt voice will notify

that the Bluetooth device is connected.

Having paired successfully, the device will

connect automatically next time.

6. Press and hold PAIR to disconnect the

currently paired Bluetooth device.

(fig. 4)

PLAY FROM A BLUETOOTH DEVICE

1. Press the button to play.

2. To pause or resume play, press the

button again.

3. Press the or buttons to select a

different track number.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa BBTU-300 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9.38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa BBTU-300 Manual

Product: