Manual Aiwa BBTU-300 (page 6 of 51) (English, German, French, Italian, Portuguese, Spanish)

793941

Zoom out

Zoom in

1/51

en 10

CREATING A CD PLAYLIST

The Program feature may be used to save

up to 20 tracks for CD and 99 tracks for CD-

MP3 in a programmable playlist.

1. While in stop mode only (CD is not playing),

press PROG, and the LCD display will show

the wording “P01” and the “PROGRAM”

indicator.

2. Press the or buttons to allocate the

desired track.

3. Press the PROG button to select and store

the track into the memory.

The program sequence will change to

“P02” to choose the next track.

4. Repeat steps 2 and 3 to select up to

20/99 tracks.

Once the last track has been added, the

LCD display will automatically show the

programmed tracks one by one, starting

with the first one that was programmed.

If you want to create a playlist with less

than 20 or 99 tracks, press twice the PROG

button after confirming your last track.

5. To play the selected tracks (in the program

mode), press the button.

6. Press the button to hear the previous

programmed track or press to hear the

next programmed track.

7. To clear the programmed tracks from the

memory, press the button twice or open

the CD TRAY LID.

You can play your audio CD/CD-MP3 in

your boombox.

1. Manually lift the CD COMPARTMENT LID.

2. Insert a CD with the printing side facing

up and gently close the disc tray manually.

3. Slide the MODE switch to the CD-USB-

BT-AUX position to turn on the unit.

4. Once the MODE switch has been slided to

CD-USB-BT-AUX position, the unit will

automatically start reading the disc, and

the total number of tracks found will be

displayed.

The CD MODE INDICATOR will appear on

the left side of the display.

5. Press to start or resume the playback.

Press again to stop the playback

temporarily.

When the playback is paused the symbol

will ﬂash on the screen.

6. Press the or buttons to select a

different track number.

Press once to hear the beginning of the

current track, and press it twice or more

to hear the previous track.

7. Press the button to stop play.

The display will show again the total number

of tracks.

SEARCH MODE

During playback press and hold or

buttons to ﬁnd a speciﬁc passage within the

track and release it at the point you want to

listen to.

ABOUT MP3 DISC COMPATIBILITY

This unit is compatible with:

Sampling Frequency: 32-48 (MP3)

Bit rate: 32-320kbps (MP3)

Do not use special letters such as:

/ :*?< > etc

Even if the total number of files on

the disc is more than 1000, it will only

show up to 999.

BASIC OPERATION CD/MP3BASIC OPERATION CD/MP3

Note:

• Because MP3 discs have a large capacity,

disc access times are a little longer.

Note:

• The screen won't lit up during the FM

and AM function modes.

Notes:

• All programmed tracks will be played

through once.

• "Repeat one" or "repeat all" functions

can be activated during a programmed

playback.

• If the playlist reaches the maximum

number of tracks the display will show

the word "FUL" (FULL).

Note:

• If the disc can't be read or there is no

disc inserted, the LCD display will show

the message "NOd", and then it will start

the USB function mode.

FM RADIO

RADIO OPERATION

1. Slide the MODE switch to the FM or AM

positions, to access the respective radio bands.

2. Turn the TUNING KNOB on the side of the

unit to tune to a radio station according to

the dial scale. Each turn on the tuning knob

will change the frequency up or down by

100 kHz.

TIPS TO IMPROVE THE RECEPTION

FM. For FM, pull out the telescopic antenna.

To improve FM Reception incline and

turn the antenna, reduce the length, if the

FM-signal is too strong.

You can also try to relocate the unit

near an open window to get a better

reception.

AM. For AM, the set is provided with a

built-in ferrite bar as an antenna, so

there is no need to use the telescopic

antenna.

Relocate or turn the set to find the best

position.

AUXILIARY INPUT FUNCTION MODE

This unit can be used as an active speaker for

laptop computers, MP3 and other small audio

players following the steps below.

1. Slide the MODE switch to the CD-USB-BT-

AUX position to turn on the unit.

2. Connect an auxiliary cable ended with a

3.5mm to the desired external audio device,

and connect the other end to the AUX IN

socket on the side of the unit.

Once the auxiliary cable has been inserted,

the word AUX will appear on the display.

3. Start playback on the external audio device.

Adjust the volume on the external audio

device (do not set the volume to a high

level in order to avoid distortion). You may

also adjust the volume on the boombox.

To control playback function, use the controls

on the external audio device.

AUX-IN MODE

Notes:

• The boombox cannot access the contents

in the connected external device.

• Rremove the auxiliary cable from the

boombox in order to access to another

function mode.

LISTEN TO YOUR TRACKS REPEATEDLY

Press the REPEAT button on the front panel

repeatedly to activate the REPEAT FUNCTIONS

in the following order:

1. *FLASHING (repeat the current track)

2. FOLDER (repeat all the tracks of

the current folder)

3. (repeat all the available tracks)

4. RANDOM (play randomly all the

available tracks)

5. OFF (cancel the repeat/random function)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa BBTU-300 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9.38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa BBTU-300 Manual

Product: