Manual Aiwa BBTC-550 (page 8 of 57) (English, German, French, Italian, Portuguese, Spanish)

793942

Zoom out

Zoom in

1/57

en 14

BLUETOOTH MODE

BLUETOOTH PAIRING

Prior to using the Bluetooth function, your boombox should be paired first with your Bluetooth

device. (“Pairing” means establish connection between Bluetooth devices such as mobile phones,

tablets, pc, etc).

1. Press the /MODE button to switch to

“bt” Bluetooth mode.

(fig. 1)

2. In Bluetooth mode, a voice prompt will

announce Bluetooth pairing mode and the

“bt” will flash on the display.

The BLUETOOTH MODE INDICATOR will

appear on the top middle of the display.

And the boombox will search automatically

for Bluetooth devices.

3. Turn on the Bluetooth function on your

device and make it visible (see your

device's instructions to add or setup a

Bluetooth device).

4. Search for Bluetooth devices and select

AIWA BBTC-550

Enter the code “0000” if needed.

(fig. 2)

If the devices are paired successfully, the

word “bt” will keep bright on the display,

and a prompt voice will notify that Bluetooth

device is connected.

Having paired successfully, the device will

connect automatically next time.

5. Briefly press to disconnect the paired

Bluetooth device.

(fig. 3)

PLAY FROM A BLUETOOTH DEVICE

1. Press the button to play.

2. To pause or resume play, press the

button again.

3. Turn the tuning knob to or position to

select a dierent track number.

Note:

• Compatibility with all Bluetooth devices

is not guaranteed.

TIME SETTING

SETTING THE CURRENT TIME

This unit has a built in 24 hours format clock

function. Follow the below steps in order to set

the time.

1. While the boombox is in standby mode,

press and hold the PROG/TIME button for

2 seconds.

The time 00:00 will appear flashing on

the display.

2. Turn the TUNING KNOB to the or

positions to set the hour and press the

PROG/TIME button to confirm.

Then the minutes digits on the display will

start flashing.

3. Turn the TUNING KNOB to the or to

the positions to set the minutes and

press the PROG/TIME button to confirm.

Note:

• If no button is pressed for 10 seconds,

the boombox will automatically cancel the

time setting operation.

AUXILIARY INPUT FUNCTION MODE

This unit can be used as an active speaker for

laptop computers, MP3 and other small audio

players following the steps below.

1. Press the /MODE button to turn on the unit.

2. Press the /MODE button repeatedly until

the “AUX” (auxiliary input) function mode

appears ﬂashing on the display.

Once the auxiliary input mode has been

entered, the AUXILIARY INPUT MODE

INDICATOR will appear on the top right

of the display.

3. Connect an auxiliary cable ended with a

3.5mm to the desired external audio device,

and connect the other end to the AUX IN

socket on the side of the unit.

4. Start playback on the external audio device.

Adjust the volume on the external audio

device (do not set the volume to a high

level in order to avoid distortion). You may

also adjust the volume on the boombox. To

control playback function, use the controls

on the external audio device.

AUX-IN MODE

Note:

• The boombox cannot access the contents

in the connected external device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa BBTC-550 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa BBTC-550 Manual

Product: