793942

Aiwa BBTC-550 Manual

6
Zoom out
Zoom in
Previous page
1/57
Next page
en 10
11
RECORDING TO CASSETTE
This boombox allows the user to record
cassettes from every input source available
ranging from CD's to Bluetooth playback. In
order to do that follow these simple steps:
1. Press the /MODE button repeatedly to
select the desired function mode.
2. Prepare the medium you want to record
from e.g insert a CD, tune into a radio
station, plug the auxiliary cable...
3. Insert a suitable cassette into the cassette
compartment.
4. Press the and buttons of the top panel
at the same time to start the recording.
CASSETTE PLAYBACK
1. Press the /MODE button to turn on the unit.
2. Press the /MODE button repeatedly until
tAP (tape) function mode appears flashing
on the display.
Once the tape mode has been entered,
the TAPE MODE INDICATOR will appear
on the display.
3. Press the button / of the top panel to
open the cassette door.
4. Insert a cassette and close gently the door
of the compartment.
5. To start the playback, press the button
of the top panel.
Press the button of the top panel to
temporarily stop the playback and press it
again to resume it.
6. Press the / button to stop playback.
CASSETTE FORWARDING/REWINDING
1. Press and hold or buttons of the top
panel to find a specific passage within the
track and release it at the point you want
to listen to.
2. Press the / button to stop fast-forwarding
or rewinding.
BASIC CASSETTE OPERATION
Notes:
• The buttons will automatically release at
the end of the cassette playback.
• While fast-forwarding or rewinding, the
buttons will not release automatically at
the end of the cassette.
Notes:
• This boombox is not suitable for recording
on CHROME (IEC II) or METAL (IEC IV)
cassettes. To record, use NORMAL
cassettes (IEC I) on which the record
tabs (small squares found on the top
corners of the cassette tape) have not
been removed.
• To prevent re-recording on a cassette,
remove the record tabs.
• To re-record a cassette that does not have
recording tabs, just put some adhesive tape
over the squares where the tabs used to be.
• When recording to a cassette from a
auxiliary input or Bluetooth, you can
adjust the volume level from the external
device.
• The best recording volume level is set
automatically.
Adjusting the volume control will not aect
the recording.
• No recording will take place in the first 7
seconds and last 7 seconds of the cassette.
CREATING A CD PLAYLIST
The Program feature may be used to program
up to 20 tracks for CD and 99 tracks for
CD-MP3 in a programmable playlist.
1. While in stop mode only (CD is not playing),
press PROG, and the LCD display will show
the wording “P01” and the “Program”
indicator.
You can play your audio CD/ CD-R/ CD-RW/
MP3 in your boombox.
1. Press the /MODE button to turn on
the unit.
2. Lift up manually the CD COMPARTMENT LID.
3. Insert a CD with the printing side facing
up and manually gently close the disc tray.
4. Press the /MODE button repeatedly until
Cd (CD) function mode appears flashing
on the display.
Once the CD mode has been selected, the
CD MODE INDICATOR will appear on the
display.
Then the player will start reading the disc,
and the total number of tracks found will
be displayed.
5. Press SCAN/ to start or resume the
playback. Press SCAN/ again to stop
the playback temporarily.
When the player is in pause mode the
screen will flash to indicate it.
6. Press the button to stop playing.
The display will show again the total number
of tracks.
SELECT ANOTHER TRACK OR FILE
Turn the TUNING KNOB on the right top
panel to the or positions to select
a different track number.
Rotate briefly to once to hear the
beginning of the current track, and turn it
twice or more to hear the previous track.
LISTENING TO YOUR TRACKS REPEATEDLY
Press the REPEAT button on the front
panel repeatedly to activate the REPEAT
FUNCTION in the following order:
1. REPEAT 1 (repeat the current track)
2. REPEAT (repeat all the available tracks)
3. OFF (cancel the repeat function)
ABOUT MP3 DISC COMPATIBILITY
This unit is compatible with:
Sampling Frequency: 32-48 (MP3)
Bit rate: 32-320kbps (MP3)
Do not use special letters such as:
/ :*?< > etc
Even if the total number of files on
the disc is more than 1000, it will only
show up to 999.
BASIC OPERATION CD / MP3
2. Turn the TUNING KNOB to the or
position to allocate the desired track.
3. Press the PROG button to select and store
the track into the memory.
The program sequence will change to
“P02” to choose the next track.
4. Repeat steps 2 and 3 to select up to
20/99 tracks.
5. To play the selected tracks (in the program
mode), press the button.
6. Turn the knob to position to hear the
previous programmed track or turn to
position to hear the next programmed
track.
7. To clear the programmed tracks from the
memory, press the button twice or open
the CD TRAY LID.
Note:
• Because MP3 discs have a large capacity,
disc access times are a little longer.
5. Start the playback of the desired source.
6. Press the button to pause the recording
and press it again to resume it.
7. Press the / button to stop recording.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa BBTC-550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa BBTC-550 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info