29025
9
Zoom out
Zoom in
Previous page
1/23
Next page
Page 9
VG6000
TRANSMITTER STICK TENSION ADJUSTMENT
To adjust the spring tension of the transmitter sticks you need to remove the back of the transmitter case.
First remove the antenna and the NiCd battery pack from the transmitter. Now remove the eight screws
that hold the case back in place, four in the main case, two in the LCD back cover and two on the handle.
Once the screws are removed swing the back of the case away from the transmitter being careful of the
trainer plug wiring.
There are four locations for the stick tension adjustment screws installed because the stick controlling
the throttle is ratcheted and has no tension adjustment. The #1 and #3 screws adjust the tension for the
vertical motion of each stick. The #2 and #4 screws adjust the tension for the horizontal motion of each
stick. To make the tension adjustment use a small phillips type screwdriver to turn the adjustment
screws. Turning the screw clockwise will increase the stick tension, turning it counterclockwise will
decrease the tension. Once you have completed your stick adjustments, replace the case back and
install the NiCd battery pack and antenna. Be careful to line the battery charging port pins when replacing
the back cover.
WARNING:
Any other modifications made to the transmitter other than adjusting stick tension will void any and all
warranties covered be Airtronics Inc.
Screw Locations
1
2
3
4
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics VG6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics VG6000 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info