28962

Airtronics RD6000super Manual

23
Zoom out
Zoom in
Previous page
1/75
Next page
23
As an example, to set Exponential for elevator, access “EL” in the Channel area by using the (CH+) key.
Now press the FUNCTION down key to select the EXP display for the Elevator Channel as shown below.
This screen tells you the present Exponential status of the elevator channel and when a Dual Rate Exponential switch
is set to ON position, the Exponential setting for that control function. The possibilble range for Exponential settings is
from -100% to +100%. Note that 0% is linear. A negative value will speed up the response and it will make the stick
movement more sensitive around the neutral position.
To set an EXponential rate in this example, turn the Dual Rate switch for Elevator to the ON upward position. Note
that the display changed to Exponential #2. You can set the value for the Elevator channel Exponential. Press the
INC+/Yes key to set a positive value of Exponential function as indicated below.
In the above example we set Exponential #2 to be 20% of the maximum for the Elevator channel. This is a good
starting point for determining the suitability of Exponential throw for you aircraft and flying style.
You can actually have two different Exponential setting’s if you desired. One for switch position #1 and another for
switch position #2. However when you first start using Exponential throw, it is usually best to leave the switch #1
position at 0% which is linear throw.
In general, large amounts of Exponential are useful only in instances where very large control surface deflection is
required at extreme throw, while very small amounts of control response are necessary for smaller control stick
inputs. One example of models for which large Exponential settings may be useful is the highly maneuverable
“Competition FUN FLY” style models. For most sport and aerobatic models, an Exponential setting from +10% to
+25% will give the desired “softness” around neutral.
CAUTION: Proceed with care when setting Exponential functions to ensure that you will have adequate control
deflection available in any possible switch position. Setting Exponential to a very high or 100% setting will require
very large stick movements to achieve small control responses. Always make sure that you are aware of the present
status of any rate assignments that you have selected! For the most flexibility in setting up an aircraft model to your
liking, study the available options for Dual Rates, End Point Adjustments, and Exponential. The combinations
possible when using these options allows for several possible set-ups. The Exponential for the Aileron Channel is set
in the same manner as done for the Elevator. The AI D/R switch located above the right stick assembly is then used
when setting the Exponential Throw.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info