28962
13
Zoom out
Zoom in
Previous page
1/75
Next page
13
RD6000 Super AERO FEATURES
FEATURES
STW (Stopwatch)
REV (Reverse)
D/R (Dual Rate)
CNT (Center)
TRM (Trim)
EXP (Exponential)
EPA (End Point Adjustment)
M-SL (Model Select)
MOD (Modulation)
TYP (Type of Model)
INT (Integral Timer)
RST (Reset)
CLK (Click)
NAM (Name)
SW-R (Switch Reverse)
CPY (Copy)
FLAPE (Flaperons)
DELTA (Elevons)
V-TAIL (Rudder and Elevator)
D/A-A (Dual Rate Alarm)
DESCRIPTION
Used as a stopwatch or to
countdown to a preset time.
Reverses the servo operating
direction.
Adjusts servo throw. Available on
Elev and Ail.
Changes servo neutral position.
The LCD provides an indicator of
the value, as well as the direction of
the trim.
Changes the linear movement of the
servo to the relation of the stick
movement. Can be set Positive or
Negative.
Limits the total movement of a servo
in each direction.
Select models 1, 2, 3, 4, 5, 6, 7, 8.
Transmitting Modulation PPM/FM,
PPM/Reverse FM, PCM1, PCM2.
Model Type Aircraft or Helicopter.
Used to show how long the
transmitter has been in use. Can be
reset to zero.
Clears all setup data in any model to
factory default settings.
A beep sound can be heard every
time you press a transmitter key.
Options Active or Inoperative.
You can use up to 3 characters to
name your model.
You can reverse to default direction
of all control switches.
Copy one model to another.
Activates 2 channels to be used for
Ailerons.
Ailerons operate as ailerons and as
well as Elevators. Used for flying
wings.
Used for V-Tail models.
Alerts you when a Dual Rate switch
is on. Options On or Off.
T-CUT (Throttle Cut)
C-MIX (Compensation Mixing)
E>F (Elevator to Flap Mixing)
R>A (Rudder to Aileron Mixing)
R>E (Ruder to Elevator Mixing)
F>E (Flap to Elevator Mixing)
SPOIR (Spoilerons)
AI-DIF (Aileron Differential)
L-DIF (Landing Differential)
CR:LA (Crow Left Aileron)
CR:RA (Crow Right Aileron)
OPT (Option Menu)
Step (Trim Step)
FAIL (Fail Safe)
B-F-S ( Battery Fail Safe)
BASIC ( ON/OFF )
You can set the point where the
throttle can be cut using the
throttle cut-off button.
Ability to mix a master channel to
another slave channel with a C-
Mix Switch.
Ability to mix Elevator to Flap.
Ability to mix Rudder to Ailerons.
Ability to mix Ruder to Elevator.
Ability to mix Flap to Elevator.
For sailplanes. Both aileron will act
as spoilers as the throttle stick is
used.
Changes the total amount of throw
up and down to both aileron
servos independently to help stop
a bad yaw.
Allows Aileron control to remain
effective when Crow or Spoilers
are used (Sailplane)
Crow is used to slow the sailplane
down. Ailerons go up when flaps
go down. Lt and
Right Ailerons are adjustable
Advanced program allows you to
turn off or on function displays.
Sets the amount of movement a
servo will move with one beep of
the trim.
You can preset a default control
input when aircraft loses it’s signal
from the transmitter. Only works
with a PCM receiver.
Will bring the throttle servo to idle
when the airborne battery reaches
a predetermaned low voltage. Only
works with a PCM receiver.
Turn Basic menu on or off
FEATURES DESCRIPTION
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info