28962

Airtronics RD6000super Manual

12
Zoom out
Zoom in
Previous page
1/75
Next page
12
USING THE RD6000 Super MICROPROCESSOR
Airtronics has invested a large amount of design effort to ensure that the powerful capabilities of the RD6000 Super
are as simple as possible to use. This manual has been written to offer the user complete instructions for either fixed
wing aircraft or helicopter models. The manual is divided into three sections. One for introduction and another for
aircraft (both powered and sailplane), and one for helicopters. You only need to read the introduction section and the
one that applies to your type of model. In most cases all of the programming of a setup is accomplished through the
use of the input keys on the RD6000 Super transmitter. The function(s) of these are shown below.
Note: Pressing the INC+/YES and DEC-/NO keys simultaneously will clear a setting and return it to the default value.
BAR GRAPH VOLTAGE INDICATOR
As a convenience the RD6000 Super transmitter provides a Bar Graph transmitter battery voltage indicator at the top
of the Liquid Crystal Display screen labeled “E” and “F”. The “F” symbol indicates FULL and the “E” indicates EMPTY.
You can consider it similar to a visible gas gauge. The Bar Graph indicator is in addition to the normal battery voltage
that is displayed on the main screen when ever you select either AIR or HELI by pushing the END key twice. When
the Bar Graph reads less than half you should not fly until you recharge the transmitter.
Press this key to move up in a menu
Press this key to increase a value or to indicate YES
Press this key to
decrease a value or to
indicate NO
Press this key to return to
the previous screen
Select Flight Mode (Helicopter)
Press this key to move
down in the menu
Press this key to select a
channel and move to the left
Press this key to select a
channel and move to the Right
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info