28962

Airtronics RD6000super Manual

6
Zoom out
Zoom in
Previous page
1/75
Next page
6
RD6000 SUPER TRANSMITTERS FEATURES
The RD6000 Super narrow band PPM/FM computer radio control system is designed for the use by power model,
sailplane, and helicopter pilots who demand a quality product. The RD6000 Super is packed with all of the capabilities
that the beginner as well as the more advanced modelers demand for all three types of flying. It has the features
available to get the most out of any type of model.
Program Features for all types of models (BASIC turned ON)
8 Model Memory
Stop Watch
Digital Trims
Servo Reversing on all channels
Dual Rate on Elevator and Aileron channels
(Plus Rudder on Helicopter)
Large Screen Liquid Display (LCD)
End Point Adjustment on all channels
Aircraft Advanced Features (BASIC turned OFF)
All of the features listed under the program with the BASIC turned ON are also included in this Advanced Features
section.
Expoential Aileron Differential
Trim Memeoy Landing Differential
Trim Authority (STEP) for digital trims Crow
Model Naming (3 Letters) Dual Rate Alarm
Failsafe / Hold (PCM Rx only) Menu Options
Receiver Battery Failsafe (PCM Rx only) Flap to Elevator Mix
Low Battery Alarm Throttle to Elevator Mix
Integtal System Timer Rudder to Aileron Mix
Data Copy Aileron to Rudder Mix
Flaperon Mix Rudder to Elevator Mix
Spoiron Mix Elevator to Flap Mix
Elevon Mix Switch Reverse
V-Tail Mix 2 Comensation Mixers
Throttle Cut 4 Modulation Modes
Click Delta Mix
Helicoter Features (BASIC) Helicopter Features (Advanced) includes Basic
Stop Watch Exponential
Servo Reversing Fail Safe (PCM Rx Only)
Dual Rate Elev, Ail and Rud Throttle Cut
Servo Centering Model Naming (3 Letters)
End Point Adjustment 2 C-Mixers
Throttle Curve (5 Point) in all Flight modes Integral System Timer
Revo Mix (3 Point) in all Flight Modes Trim Step
4 Flight Modes Switch Reversing
Gyro Senseativaty Adjustment in all Flight Modes Data Copy
Pitch Curve (5 Point) in all Flight Modes 4 Modulation Modes
Model Select Click
Model Type Battery Fail Safe (PCM Rx only)
Data Reset Dynamic Trim Memory
Bacic ON Swash Plate Type
Basic OFF
Option Menu
Model Type selection
Center Adjustment on EL, AL, TH, RU, and P-F
Data Reset
LCD Transmitter Voltage Meter
High Capacity Transmitter/Receiver NiCd
Batteries
Adjustable Stick Tension and Length
Low Battery, High Throttle and Power Alarms
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics RD6000super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics RD6000super in the language / languages: English as an attachment in your email.

The manual is 6,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info