594075
12
Zoom out
Zoom in
Previous page
1/24
Next page
10
Do not drive fasteners on top of other fasteners. Tool fired in an inclined angle
is also forbidden. (14)
Do not push safety element on work surface until a second fastener is desired.
(13)
Do not drive fasteners close to the edge of the work surface. The workpiece is
likely to split and the fastener could fly free and hit someone. (14)
Do not load fasteners with trigger or safety element depressed. (15)
Do not use tool without danger label on tool.
Never use a tool that leaks air or needs repair. (16)
Be sure you are in a balanced position when using or handling the tool. (17)
Operate tool only at recommanded pressure of 3,5 – 8 bar.
3. TOOL USE
Read “Safety warnings” before using the tool. (1)
Keep the tool pointed away from yourself and others and connect air to tool.
(12)
Push click lever and slide upper magazine to open it. (18)
Place strip of fasteners into magazine. Do not load when the trigger is
depressed. (19)
Push upper magazine back until click lever latches. (20)
Position safety against work surface and pull the trigger. (13)
Disconnect the air supply in case the fastener is jammed. (12)
Push click lever and slide upper magazine to open it. Remove the fasteners.
(18)
Remove the jammed fastener. (21)
Keep the tool pointed away from yourself and others and connect the air to the
tool. (12)
Place strip of fasteners into the magazine with points resting on fastener guide.
Do not load with trigger depressed. (19)
Push upper magazine back untill click lever latches. (20)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress Tackers at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress Tackers in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info