Manual Airpress KM100-220 (page 31 of 56) (English, German, Dutch, French)

594043

Zoom out

Zoom in

1/56

Protect the machine from frost and rain. With temperatures below zero, the valves

can freeze to the pump which may cause damage to both motor and pump.

Notice: insufficient air supply, too high temperature and fouling of the air

filter reduce the efficiency of the compressor considerably.

3.1 ELECTRIC CONNECTION L/LM/KM/BLM

At the factory the machine is already fully equipped with cables. The machine now

has to be connected to your own electricity supply. Beware that voltage and

amperage of your electric circuit meet the needs of the motor. For that check

technical details. Use only cables with the right diameter. The factory advises to

use cables of at least 2,5 qmm.

Before first use first read chapters 3.2 and 4.0.

3.2 AIR CONNECTION

The compressor is equiped with an air reduction/filter combination with two

closable air connectors (except type L 5-90).

Best use for connection of the compressor to an air circuit a flexible hose, to

isolate fibrations from the machine. The diameter of the hose must meet the

diameter of the air connection on the compressor. For quickly attaching and

unattaching of hoses and pneumatic tools it is well advised to use quick-couplings.

4.0 FIRST USE

1 Check if the instructions mentioned above have been executed.

2 Check the oil level of the compressor. Possibly oil has been lost during

transport. The oil level has to be between the upper side of the oil level glass

(12) and the red dot. If necessary, fill with AIRPRESS compressor oil.

3 V-belt models: check the tension on the V-belt. At the right tension the V-belt

can easily be turned by hand approximately 45 degrees. If necessary improve

tension (see chapter 6.0 point 5).

5.0 L, LM AND KM COMPRESSORS

5.1 FUNCTIONING

When the pressure switch (2) is turned on at an air pressure of 0 bar/psi, the motor

(8) will start. The motor is directly connected to an one, two or three cylinder pump

(11).

When a specific pressure has been achieved, the pressure switch automatically

stops the motor and relieves the internal air circuit from pressure. When air is

being used, pressure will drop. When low enough, the pressure switch will start the

compressor again automatically.

With the reduction valve (5) you can reduce a too high air tank pressure to a

desired working pressure. The step less adjustable pressure can be read from a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress KM100-220 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress KM100-220 Manual

Product: