593981
23
Zoom out
Zoom in
Previous page
1/48
Next page
21
6.0 MAINTENANCE
Before carrying out any maintenance jobs it is obligatory to stop the
machine, disconnect it from the power mains and make sure that the tank
is pressure free by opening the condensation draintap (10).
1. After the first 50 operating hours and then every 250 operation hours the oil
should be refreshed. Turn off the oil drain plug (11) and also remove the filler
cap (13). Collect the oil. If the oil does not come out any longer, switch on the
drainplug again and refill the oil (through fillercap) until the oil has reached the
correct level.
The right oil level is on the maximum stripe on the oil-level indicator (13).
Always respect the regulations in force for disposing of old oil!
2. Regularly drain condensation water. The draintap is situated at the bottom of
the tank (10). Draining with pressure in the tank is the easiest way. Some
compressors have an aftercooler with its own drainplug. Also from this device
the condensationwater should be drained regularly.
Condensate must be disposed of in conformity with the local regulations
in force (not in the sewer!).
As an alternative you can place an oil/water separator.
3. The oil level should also be checked regularly. For the right oil level see point 1.
If necessary refill with compressor oil, order No 36398 (1/2 l) or order No
36380 (2 l). Checking daily can prevent a lot of troubles!
Use oil of the same type as that already in the machine; do not mix
different types of oil!
4. The air filter element (1) should be cleaned or changed regularly. This change
depends on the amount of fouling and should be done more often in dusty
situations and less often in a clean situation. For cleaning the filterelement, take
out the filtercontainer with the filter. Then clean the filter by blowing off the dust.
Note: Regular maintenance of your compressor will increase durability and
reliability.
MAINTENANCE TABLE
works daily weekly every every
250 hours 1000 hours
drainin
condensation water
check
oil level
clean
air filter
refresh oil (first
time
after 50 hours)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 36839 - HL 310-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36839 - HL 310-25 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info