593981

Airpress 36839 - HL 310-25 Manual

22
Zoom out
Zoom in
Previous page
1/48
Next page
20
FIRST USE
1. Check if the instructions mentioned above have been executed.
2. On delivery the compressor mostly is not filled with oil. Fill about 0,25
litres compressor oil until the maximum stripe on the oil-level indicator
(13).
3. Install the air filter (1) in the cylinder head (first remove the synthetic plug).
4. Install the oil filler cap/oil-level indicator (13) on the crank case lid (first remove
the synthetic plug).
5. Avoid the use of extension cables. If you use them, unroll them completely and
use cables of sufficient capacity. Tabel for extension cables:
0 - 10 meter: 3 x 1,5 mm
2
and 10 - 25 meter: 3 x 2,5 mm
2
• Switch on the compressor by means of pulling the pressure switch (4).
• The compressor will now operate, unless the air receiver is still under pressure
(pressure gauge 8).
• Switch the machine, during operation, exclusively off by means of pushing the
button on the automatic pressure switch (4); the pressure circuit will be vented
and the compressor can start again uncharged.
OPERATION
1. The automatically operating compressor will stop at a pressure of 8 bar (8).
When air is used again and the pressure in the tank falls to 6 bar, the
compressor will start again.
2. Most pneumatic machines are suitable for an operating pressure of about 6
bar. For some applications this pressure is even lower. To be able to set the
right pressure, the compressor is provided with a reducing valve (5). This valve
can set the pressure of the air receiver (of course never higher than the
pressure in the air receiver).
3. The setting of the reducing valve is done as follows: switch the button to set the
right pressure (to the left to lower the pressure, to the right to increase it). The
setting pressure is shown at the gauge (7).
4. Two extra plugs (9) are fitted to the tank, which can be used to get an extra
pressure connection.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airpress 36839 - HL 310-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36839 - HL 310-25 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info