Manual Airpress 36821 (page 35 of 56) (English, German, Dutch, French)

594049

Zoom out

Zoom in

1/56

in mind the compressed air output necessary for your work, and the air output value

written in the EC plate.

These models can work either with both the units or with only one unit, and

the operation mode is controlled by an electronic board (Fig. 7).

You can select among the following operation modes:

• Cycle M1-M2: alternated operation ot the two pumping units.

• Cycle M1: operation ot the sole pumping unit M1.

• Cycle M2: operation ot the sole pumping unit M2.

• Cycle M1 +M2: simultaneous operation ot the two pumping units.

5.2 Pressure adjustment

Have a pressure reducer installed on the delivery line of compressed air by a

specialised technician.

For correct use, check pressure correct value. Refer to the user's manual of

the tool concerned tor the working pressure setting.

By the pressure reducer adjust output air pressure to the desired value.

Atter having used your compressor, set pressure to zero, so as to avoid damaging the

pressure reducer.

5.3 ControIs and check devices

In order to identity the parts listed hereunder, see the product sheet enclosed to the

instruction manual.

• Pressure switch/remote pressure switch: checks compressor start and stop.

• Tank pressure gauge: shows the pressure inside the air tank.

• Line cock: detecting and connecting device to detect and connect the line and/or

the pneumatic tools.

• Electronic controller (Tandem versions): checks start and stop ot the compressor,

and allows selecting the operation mode (fig.7).

START Main switch

STOP turn-off switch

ON green led =running machine

OFF red led = stopped machine

AIR system mode

led OFF=correct pressure

led ON=low pressure

M1 M1 unit activated

M2 M2 unit activated

ESS drier outlet activated

M1-M2 alternated operation of the two pumping units M1 and M2

M1 operation of the sole pumping unit M1

M2 operation of the sole pumping unit M2

M1 +M2 simultaneous operation of the two pumping units

5.4 Operation set-up (Tandem modeIs only)

Before starting the compressor, it is necessary to set some parameters.

4 switches are located on the rear side of the control board (fig.7a), and

have the following functions:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36821 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress 36821 Manual

Product: