Manual Airpress 36819 (page 34 of 56) (English, German, Dutch, French)

594047

Zoom out

Zoom in

1/56

period of the guarantee. In case of need, it will be easier to send the compressor to the

service centre.

Afterwards, put it into the care of the company or board in charge of elimination.

4.2 Positioning

As previously said all compressors can work properly even on an plane with a

transversal or longitudinal inclination over 15°.

In order to ensure proper air flow, position and fit the compressor so as to

leave the ventilation grill at least at 20 cm from any obstacles which may

prevent air from flowing out correctly, and so as to facilitate maintenance and

cleaning operations.

When choosing the room of installation of your compressor, make sure that the

installation place meets all the safety standards in force in the country in which the

compressor is used, and that the following conditions are respected:

• low room dust percentage,

• the working room should be large enough to allow the room temperature to be kept

within 40° when the machine is running.

If the above requirement cannot be met, fit one or more exhausters for the hot air. Fit

the highest number possible for the working room.

4.3 Electric connection

AII compressors are delivered only after a successful testing period at the

factory and are ready to use.

Before performing the electric connection, you must check that the mains

power corresponds to the power data written on the EC label and that the

main SWITCH is turned to (0).

SINGLE PHASE COMPRESSORS: the compressor is equipped with a

special plug (Fig.4). If necessary, contact specialized personnel for plug

replacement.

THREE-PHASE COMPRESSORS: it is necessary to provide the supply line

with a magneto-thermal switch of suitable capacity respect to the instalfed

power (Fig.4). To such purpose, follow the indications written in the table.

Order number 36819 36820 36821

Compressor power (see EC plate) CV

1,5 2,5 5 (2x2,5)

Absorbed power A 7,5 12 24

Direct start relay adjustment A 10 15 15+15

Power cable min. cross section mm² 2,5 2,5 4

Wall switch capacity A 16 16 32

5. ADJUSTMENTS

5.1 Timing and operation modes

All compressors, apart from TANDEM modeIs can work in just one mode, i.e. the

"classic" automatic mode controlled by the pressure switch/ remote pressure switch,

which stops the compressor when the max. pressure is reached, and starts the

compressor again when pressure decreases by 1.5 bar.

For TANDEM modeIs the operation mode must be set according to the quantity of

compressed air needed. We recommend that you contact your usual installer bearing

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Airpress 36819 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Airpress 36819 Manual

Product: