807115

Air and Me Polair Manual

8
Zoom out
Zoom in
Previous page
1/19
Next page
14 15
MAIN FUNCTIONS
[ SPEED ] BUTTON
To choose the 3 ventilating speeds in: LOW – MEDIUM – HIGH order. The led light turns on
according to your choice (show on the digital display c, d, e).
[ OSC ] BUTTON
Press the button ( C) to start and stop the oscillation (show on the digital display f).
[ MODE ] BUTTON
Press the button ( D) to choose the 2 ventilation modes. Press one time for NATURAL WIND
MODE and a second time for NIGHT MODE. Press a third time to disable and being in
normal mode.
– NATURAL WIND MODE: This function creates a breeze like a natural wind. It alternates
different ventilation cycles. When the mode are turns on you can choose the intensity in
changing the speeds:
• LOW Breeze: For an alternating of 75 sec ventilating cycles principally in a LOW speed
(show on the digital display a + c).
• MEDIUM Breeze: For an alternating of 75 sec ventilating cycles principally in a MEDIUM
speed (show on the digital display a + d).
• HIGH Breeze: For an alternating of 75 sec ventilating cycles principally in a HIGH speed
(show on the digital display a + e).
– NIGHT MODE: The LEDs of the digital display turn off and the speed ventilation decrease
progressively according to the start speed. Such as:
• With a LOW departure speed: still works in LOW speed (show on the digital display b
+ c).
• With a MEDIUM departure speed: the product works in MEDIUM speed during a half
hour and then still works in LOW speed (show on the digital display b + d).
• With a HIGH departure speed: the product works in HIGH speed during a half hour then
in MEDIUM speed during a half hour and still works in LOW speed (show on the digital
display b + e).
[ TIMER ] BUTTON
The product is equipped with a timer. You can program his stop from 1 hour to 8 hours. Press
several times the botton until the time appeared. (show on the digital display E).
ADDITIONAL FUNCTIONS
INSIDE DRYING OF THE APPLIANCE
Press the [TIMER] button during 3 secs for turn on the drying principal filter mode. This drying
works in HIGH speed during 20 min and stops. During this mode only the [ON/OFF] button works.
• Make sure the unit is turned off and unplugged before any manipulation.
• Do not immerse the device in water or any other liquid.
• Do not use corrosive, abrasive or ammable products to clean the unit.
CLEANING THE FILTER
It’s recommended to clean the principal filter every 2 months (more often if it’s visibly dirty) the
dust accumulation could reduce the air flow.
1. Unplug the product.
2. Remove the filters in pulling in the 2 fixings.
3.Clean the principal filter with a soft detergent and a soft brush.
4. Be aware to replacing the principal filter entirely dry.
STOCKAGE
To avoid any bacteria or virus proliferation, never store the appliance with water
inside the tank and be sure that the appliance is perfectly dry.
1. Empty and clean the tank.
2. Dry the main lter using the INSIDE DRYING function.
3. Store the product in a place that is protected against dust and that is clean and dry.
MAINTENANCE
FAQ
Problem Reason Solution
The appliance
does not work
> The product is not correctly
plug or there is an electrical
problem. > Plug the socket correctly and
check the voltage and the good
functioning of your electrical
system.
> There is a problem on the
electrical system of your
house.
Drop in the
appliance
performance
> The air inlet or outlet is
blocked by something.
> Leave at least 50 cm space
behind, on the sides and in front
of the unit.
Abnormal noise
> Something obstructs the
fan. > Make sure that no object
obstructs the air ow.
> The device has a
functioning problem. > Contact your reseller for service
support.
The air coming
out of the
appliance smells
bad
> The water in the tank
is dirty (stagnant or
contaminated).
> Empty the tank and wash and dry
both parts before turning the unit
on again.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Air and Me Polair at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Air and Me Polair in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info