807115
7
Zoom out
Zoom in
Previous page
1/19
Next page
12 13
This product could be use like a classic fan or like an air cooler in activating the COOL function.
The air cooler Polair enable to cool down your room with a enjoyable temperature. The pump
system soaks the evaporating filter with the cold tank’s water. The water content on this filter is
distributed on the room thanks to the ventilating system. In function the evaporating air cooler
humidify the ambient air.
Avoid an excessive humidity: we recommend humidity in a room between 45 and 55%. An
excessive humidity can cause health problems and damage your habitation.
OPERATION PRINCIPLE
1. Connect the device.
2. Press the ON/OFF button ( A) to turn on the device. Polair goes on automatically in normal
speed and displays the room temperature. Press a second time to switch off the product.
3. Press the ON/OFF button again to turn off the device.
OPERATING INSTRUCTIONS
COOL FUNCTION
COMPONENTS (SEE PAGE 2)
CONTROL PANEL (SEE PAGE 3)
REMOTE CONTROL (SEE PAGE 2)
A Button ON/OFF
B Button[ Speed ]
C Button [ Oscillation ]
D Button [ Mode ]
E Button [ Timer ]
F Button [ Cool ]
A Button ON/OFF
B Button[ Speed ]
C Button [ Oscillation ]
D Button [ Mode ]
E Button [ Timer ]
F Button [ Cool ]
a Indicator light [ Natural Wind Mode ]
b Indicator light [ Night Mode ]
c Indicator light [ Low Speed ]
d Indicator light [ MEDIUM Speed ]
e Indicator light [ HIGH Speed ]
f Indicator light [ Oscillation ]
g Indicator light [ Cool ]
USE PRECAUTIONS
• Make sure that the product is placed on a dry flat surface.
• Leave at least 50cm behind, around and in front of the appliance.
Make sure the filter and the tank are correctly positioned and pressed.
The remote control included a button cell battery (type CR2032 /3 V).
All the functions performed with the remote control. This remote control works like the control
display.
1 Control panel
2 LED digital display
3 Front section
4 Pre-lter and principal lter
5 Tank
6 Multidirectional wheels
7 Transport handle
8 Hand rotating aps
9 Remote control
10 Ice box
BUTTON [ COOL ]
For activating the cool mode press the button [COOL] ( F). Press a second time to turn off
this function. The cool function works with the others modes (show on the digital display
g).
This function works only if the water level is enough. If the captor detect a lack water
during 15 sec the cool mode turn off and a warning signal turn on during 10 sec.
1. Push the tank and fill it with cold water. Be away that the water level is between the min
and max marks.
2. The ice box could be placed into the tank for a better cold air flow. Before using it place
it 4 hours in the freezer.
3. Push the tank into the product.
4. Plug the product.
5. Press the COOL button for starting the cool mode.
> In cool mode the product couldn’t be use without the filters. Be away that the filters are
dry and well installed.
> Don’t pull the tank when the cool function are activated.
> Condensation can be seeing on the floor with a use of the ice box. Please use Polair on
water resistant floor.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Air and Me Polair at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Air and Me Polair in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info