560624

Aigger HSM5657A Manual

25
Zoom out
Zoom in
Previous page
1/78
Next page
25
10 To switch the machine off, you must see that the switch is set to "O", which means OFF.
Then you take the plug from the connection.
11 Always keep your fingers away from moving parts. Special attention is required around the
needle of the sewing machine and the bobbin housing.
12 Always use the right needle plate. Using a wrong plate may cause the needle to break.
13 Never use a bent or damaged needle.
14 Never push or pull the material during sewing. This may cause the needle to break. The
machine automatically transports the material at the right speed.
15 See to it that the switch of the machine is in "O", which means OFF and take the plug
from the connection when making any adjustments around the needle.
16 Check whether the mains voltage corresponds with the type plate of the equipment (see
bottom), before using it.
17 See to it that the on / off switch is in "O" position, when you put the plug in the wall
socket.
18 Do not use the sewing machine with an extension cord, unless this extension cord has
been checked and tested by a qualified mechanic.
19 See to it that the power cable does not touch any hot surfaces.
20 Place the sewing machine on a stable and flat surface.
21 Never immerse the machine, the plug, the pedal or the power cable in water or in any
other liquid.
22 Do not place any objects on the pedal.
SWITCHING ON THE DEVICE
Connect the power cable to the sewing machine. Place pedal on the floor and then put the plug
into the wall socket. (illustration 3)
The use of the pedal
The speed of sewing can be controlled with the pedal. The harder you push the pedal, the
faster the machine will run. When you let go of the pedal, the machine stops automatically.
(illustration 4)
Exchanging the lamp
Unscrew the guard with the supplied screw driver. Take off the guard, exchange the lightbulb
and fasten the guard again. Never use the device with an open guard. (illustration 5)
Needle and thread
Materials Thread Needle
Lightweight Batist Cotton thread 60- 80 9 or 11
Crêpe georgette Synthetic thread 60- 80
Challis, satin Silk thread 50 - 80
Middle weight Popeline Cotton thread 60 - 80
Tafeta silk Synthetic thread 60 - 80
Flanel, Gabardine Silk thread 50 - 80 11 or 14
Heavy weight Denim Cotton thread 30 - 50
Corduroy Synthetic thread 50
Tweed Silk thread 50 11 or 16
English
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aigger HSM5657A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aigger HSM5657A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info