495930
24
Zoom out
Zoom in
Previous page
1/44
Next page
- When you want to attach the transparent part to the motor
component again, you must take care that the rotation axle is
attached again simultaneously.
- The rotation axle must be locked, the middle slit of the rotation axle
falls between the transparent part and the motor component.
-You can slide the whole into each other again.
The motor must not be immersed in water like the other components!
Clean the motor of the ice cream maker by means of a moist cloth.
Always first take the plug off the wall socket before you clean the motor.
Recipes
Lemon sorbet
Ingredients:
4 lemon juice - 200 gr sugar - 30 cl water
Method of preparation:
Grate the peel of 3 of the lemons and squeeze them all.
Allow the sugar to dissolve in the heated water and then add
the shredded peel, which you have allowed to stew for 10
minutes.
After that you add the juice of all the lemons and let it cool
down.
Pour the whole into the ice cream maker and turn approx. 35
minutes until it is ice cream. Place the whole after the
preparation in the ice cream maker in the freezer for
approximately half an hour.
Serving tips:
Put some balls in a flat champagne glass and sprinkle with
shredded fresh mint.
47
Important
1. This device is only intended for domestic use.
2. Only use the device as is described in these directions for use.
3. Do not use this device when the power cable or the plug is damaged,
if the device has fallen, or has been damaged in another manner.
4. Keep the power cable away from hot surfaces.
5. Always place the ice cream maker in such a way that it is out of range
of children.
6. Always place the ice cream maker on a hard, flat surface where it can
not fall into the water or into another liquid, when you are going to
use it.
7. Take the plug from the wall socket; when the power cable has become
unusually hot by the use.
8. Take care that the device and the components are clean.
Maintenance
After the use of the ice cream maker you must wash the above-
mentioned components in warm water. To prevent undesirable odours
you can add some detergent to the water.
- Hold the motor component overarm with one hand. With your other
hand you slide the motor component off the transparent part.
- The rotation axle now also comes loose.
- You can now wash the transparent part of the motor component.
ICE CREAM MAKER
46
English
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aigger FJ-501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aigger FJ-501 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info