733806
27
Zoom out
Zoom in
Previous page
1/32
Next page
23
Side and Overhead Clearances
If you are installing the appliance in a new kitchen or have
the opportunity to set the width between kitchen units, it
is advisable to include an additional small gap each side of
3mm to assist with installation and prevent damage when
moving the product.
A 6mm additional width clearance should also be provided if
the appliance is to go into a brick recess, to allow for the wall
being out of square.
Where installed against a side wall protruding in the front of
the appliance a 116mm clearance is required on the left or
right hand side for the oven door access (Fig. 16.1).
Any side wall above the appliance on either side shall not be
less than 60mm horizontally from the appliance (Fig. 16.2).
Surfaces over the top of the appliance must not be closer
than 650mm i.e. cabinets or cookerhoods.
The rear gap at the rear of the appliance MUST NOT be
blocked o or obstructed.
Appliance Base or Hearth
n
If the appliance is placed on a base, measures have
to be taken to prevent appliance from slipping from
the base.
It is essential that the base or hearth on which the appliance
stands should be level and be capable of supporting the total
weight of the appliance.
The front plinth cover is removable and must not be
obstructed by ooring or tiles. If necessary the appliance
must be raised by the thickness of the tiles to ensure the
plinth can be removed, and the appliance can be rolled out
for service.
Tiling
When the appliance is to stand in a recess or against a wall
which is to be tiled, under no circumstances should the tiles
overlap the appliance top plate, access to remove the top
plate must be allowed for servicing at a later date.
634
1070
116mm
984
60mm
Fig. 16.1
Fig. 16.2
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aga R3 Series 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aga R3 Series 100 in the language / languages: English as an attachment in your email.

The manual is 5,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info