534691
37
Zoom out
Zoom in
Previous page
1/43
Next page
Afinia H-Series 3D Printer User’s Manual
37
Troubleshooting
Problem or Error message Solution
No power Verify power cord is securely plugged in
Extruder or platform fails to
reach operating temperature
Verify printer has initialized. If not, initialize the printer
(see page 11)
Heater is damaged. Contact Technical Support (page 38)
Material not extruding
Material is stuck in the extruder; remove the material (see
page 31)
The nozzle is clogged and needs to be cleaned (see page
32) or changed (see page 33)
Cannot communicate with
printer
Printer not initialized; use Initialize button on front or
Initialize function in software
Make sure the USB cable is connected to the printer, and to
the PC
Unplug the USB cable, then plug in again
Reset the printer—power off then power on
Restart the PC
Others Contact Technical Support (see page 38)
Solution for "Winusb.dll not found" problem (Windows)
If you encounter a “Winusb.dll not found” error message, please
follow the steps below:
Option 1: Uninstall Older Driver and Auto-Install New Driver
1. Open the Windows control panel, go to the System Properties
dialog box and select the Hardware tab.
2. Click the Device Manager button, and the following dialog box
will popup. Find the 3DPrinter@FreeMC in the USB
section.
3. Click the right mouse button and select the Uninstall option.
The confirm dialog box will appear. Click OK.
4. Install the latest Afinia H-Series 3D software.
5. Unplug the USB cable, then plug it back in.
Windows will find a new device. Manually
select the driver folder (the default location is
C:\Program Files\Afinia\Afinia 3D Printer\
Drivers).
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Afinia H-Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Afinia H-Series in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info