534691

Afinia H-Series Manual

35
Zoom out
Zoom in
Previous page
1/43
Next page
Afinia H-Series 3D Printer User’s Manual
35
Shell Setting Tips
The Shell option for the print Fill setting can be used to create truly hollow prints, saving time and
material. However, not all models can be printed with this fill setting.
Models with relatively small horizontal or near-horizontal surfaces are potential candidates for
shell printing, as these surfaces require little or no internal support to be successfully printed.
Remember, each model is different – you may need to experiment with each model to find out if it
can be used with Shell printing.
Decrease print time where possible
The faster you can print parts, the less lifting from the platform you are likely to get. Some ways
to increase print quality include:
• If possible, try to avoid printing large parts in solid mode
• Set the layer resolution to as large a value as possible while still retaining the quality
needed for the finished part
• Print the part in Normal or Fast mode
• If printing multiple parts at once, reduce the number of parts that are being printed
Pause During Print: Changing Filament
If you need to change the filament during printing, you can either use the Pause Print button in the
Maintenance window or enter in automatic pauses when you are setting up the print parameters
(see page 27).
When paused, click the Withdraw button to remove the current filament. After changing
filaments, insert the new filament and click the Extrude button to load your new filament.
If you have changed colors, you may need to extrude a few times to remove the last of the
previous filament color.
Keep the extruded filament connected to the nozzle – pull it from the nozzle just before the nozzle
contacts the print surface when resuming the print to keep any stray strands from sticking to your
model.
Model Creation: What does “Manifold” mean?
For any model to print correctly, it should be a manifold object. What this means is, as simply as
possible, is that each edge must be in contact with two and only two surfaces. Most design
software will allow you to create non-manifold objects, which can result in print problems.
The most common way for a model to become non-manifold is when several objects are joined
together, creating surfaces in the model that are in contact with or crossing through each other.
The Fix function in the Edit menu of the Afinia 3D software may repair the non-manifold problem
areas, but the best solution is to correct any problems in your design software. Many software
packages have functions to check for and repair any non-manifold models – the documentation for
your software should be consulted.
Model Creation: What does “Surface Normalization” mean?
The outer layer of every 3D printed object is actually composed of an outer surface and an inner
surface. Surface Normalization means these surfaces are pointing the correct way. If you have
an outer surface buried inside your model, or have an inner surface on the outside of the model,
you will need to normalize the surfaces.
The most common way for non-normalized surfaces to appear is when two surfaces cross each
other in the model.
The Fix function in the Edit menu of the Afinia 3D software may resolve the surface problems, but
the best solution is to correct any problems in your design software. Many software packages
have functions to check for and remove any non-normalized surfaces – the documentation for your
software should be consulted.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Afinia H-Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Afinia H-Series in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info