782361
113
Zoom out
Zoom in
Previous page
1/136
Next page
SCOOPY+ S - User Manual
107
6.2. Using the remote html access
This service allows to access the html pages of the codec from remote.
What you need on the SCOOPY+ S:
Up-to-date firmware (1.09 minimum).
The "Remote access" option.
Internet access, for instance via an Ethernet connection to a LAN. But other IP connections are
suitable as well: mobile data access
The control device can be any device with a web browser (no need to install any application): computer,
tablet or even a smartphone…
6.2.1. Step 1: connect the SCOOPY+ S to the server
First you must connect the codec to the AETA server so that it is accessible. To protect the access to the
unit, you can define a "codec password" that allows to get control over it.
Note: as a security measure, a password that is blank or too short is not accepted by the system (see
more on this topic in 6.3, Security aspects).
Menu Tools > Maintenance > Remote Access: activate "Remote Access".
In the same menu, you can select the IP interface that the codec will use for connecting to the service:
"Network Interface". For using always the same interface as for AoIP transmission, select "Auto".
To check the successful connection: menu Tools > About, "Remote Access Status".
If you want to change the password, go to the menu Tools > Maintenance > Remote Access, Codec
Password. The following rules apply to this password:
The password must be at least 8 characters long. For safety, it is recommended to use at least
13 characters, with a combination of uppercase and lowercase letters, numbers, and special
characters among the following: _ - + * . : , ; # ? ! = .
If you enter a blank password, or one with less than 8 characters, a random password is
automatically generated by the SCOOPY+ S.
Variation: you can also use the "REMOTE ACCESS" html page for this step:
Maintenance tab, REMOTE ACCESS page, check "Allow Remote Access".
On the same page, you can select the IP interface that the codec will use for connecting to the service:
"Network Interface". For using always the same interface as for AoIP transmission, select "Auto".
To check the successful connection: STATUS page, GENERAL section.
You can change the password, with following rules:
The password must be at least 8 characters long. For safety, it is recommended to use at least
13 characters, with a combination of uppercase and lowercase letters, numbers, and special
characters among the following: _ - + * . : , ; # ? ! = .
If you enter a blank password, or one with less than 8 characters, a random password is
automatically generated by the SCOOPY+ S.
6.2.2. Step 2: open the remote session
The SCOOPY+ S to be controlled must be connected to the server, and you must know the serial number
and the "Codec password" of the unit.
Open a web browser, and go to the following URL:
https://cloud.aeta.com/rac
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info