782361
79
Zoom out
Zoom in
Previous page
1/136
Next page
SCOOPY+ S - User Manual
73
Mobile network (integrated module)
This part applies to units equipped with the "HD-4G mobile" option, which integrate a mobile network
access module and antennas.
Prerequisites
A mobile network can be used as interface for AoIP connections. It can be used in voice mode as well
(regular telephone links), especially for the coordination channel (case 3 or 4 mentioned above in 4.5.1).
You must have a subscription and a SIM card granting access to mobile transmission. In The subscription
must include access to the service(s) you intend to use: mobile data (3G/4G) for setting AoIP connections,
and/or telephone service for coordination or backup (case 3 or 4 above) or even as program link.
Mobile networks often set obstacles to AoIP towards a mobile terminal: NAT routers, often symmetric
(which prevents benefitting from a STUN server), etc. Above all, it is rare to be assigned a public IP
address, and is never possible to get a public and fixed IP address.
As a consequence it is very difficult to receive a call without using a SIP server. On the other hand, if the
SCOOPY+ S is registered on a SIP server, once the data connection is active the codec is ready to receive
an incoming call.
Preliminary settings
First insert the SIM card in the SCOOPY+ S (the unit must be powered off for this). See how to proceed in
3.2.2, "Drawer for SIM card " section. Power up the codec, enter the sub-menu Setup / Network /
Mobile Parameters / PIN. Enter the PIN code of the SIM card using the keypad and press . This is
useless, of course, if the card’s PIN code is blank or disabled. Besides, if you check PIN Save, you will not
need to enter the PIN again, even after rebooting the unit.
The network access must be configured using the "Mobile Parameters" menu (Setup / Network /
Mobile Parameters), see details in page 59, Mobile Parameters. The following settings are suitable in
most cases:
Leave "Auto" for the Preferred Techno setting. Conversely, avoid "Only 2G", as the
performance in such case is too poor for AoIP.
Leave "Auto" for the Network Operator setting, unless you have a specific reason to force
this setting.
Select the data mode: Mode / IP Mode.
Activate the mobile data by checking "Data Active". The other parameters are usually
adjusted automatically.
If however the Access Point parameters are not set, or their preset values are not suitable,
you can enter new values: enter Access Point / APN, enter the appropriate access point name
using the keypad and .
You can define a Network Quality: in doubt, select "Middle". The best is to perform a test on
a significant amount of time, and change the setting if the resulting stability is not good
enough.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info