782361
76
Zoom out
Zoom in
Previous page
1/136
Next page
70
SCOOPY+ S - User Manual
4.5. Setting up a link
For dealing with links with the SCOOPY+ S, generally you should go through the following steps:
1. Select the basic options that will essentially determine the operation: audio operation
(mono/stereo, with/without coordination), transmission network type. This is described below
(4.5.1, Basic options).
2. Prepare or check the settings for the network interface(s) you will use. See below (4.5.2,
Preparing the network interface(s)).
3. Select the suitable coding configuration for the link. See below (4.5.3, Setting the coding
configuration).
4. Select or dial the destination address/number and launch a call to the desired destination. This
is described below (4.5.4, Launching calls).
5. Alternatively, the unit can also receive calls from remote units. See below (4.5.5, Receiving
calls).
4.5.1. Basic options
Before setting up links with the unit, you should select the basic operating mode. For this, the main
choices to do are:
What will be the main network for the transmission? Depending on the equipment of the
SCOOPY+ S and the available resources, the type of network is ISDN, Ethernet, mobile IP, mobile
voice or POTS. In addition, there may be alternate interfaces: for instance, the mobile access
may be using the internal module (HD-4G option), or an external USB device.
Mono or stereo for mixing and transmitting? Of course, this choice is linked to the previous
one.
Will you use coordination thanks to a mobile voice link? This is possible if the "HD-4G mobile"
option is installed, and in mono operation.
The table below summarizes the possible combinations available:
Table 7 Basic operating modes
Case 1: only one link is set for mono operation; any available network interface can be used.
Case 2: only one link is set for stereo operation. This case is automatically selected as soon as
stereo encoding is selected. It is not supported by all network types.
Case 3: a mobile voice link (using the integrated mobile access module) is used for a
coordination channel. This case requires the presence of an internal mobile network access
module (HD-4G mobile option). It is selected when the choice for "Routing for Mono" is
"Program & Coord.".
Case 4: a variation of the previous case; this time the mobile voice link is used as a backup, to
which the remote control room can switch in case the normal program link is lost. This case is
selected when the choice for "Routing for Mono" is "Main & Backup".
ISDN Ethernet Mobile IP POTS Mobile voice
1 - Mono
2 - Stereo
3 Mono Coord
4 Mono Backup
PGM
Main
Case
Usage of
HD-4G option
Audio
mode
Transmission
PGM
PGM
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info