782361
50
Zoom out
Zoom in
Previous page
1/136
Next page
44
SCOOPY+ S - User Manual
3.5. Managing links
3.5.1. Setting up and releasing links
Generally speaking, once the codec is set up and the transmission interface(s) to be used is(are)
configured, it is possible to manage audio links with remote devices.
A transmission links/sessions have to be set, which can be done in two ways:
"Outgoing call" launched towards a remote device: the procedure is to select a transmission
interface, a coding configuration, "dial" the destination to call and then set the call to the
remote unit. The detailed operating mode is described further, for the various transmission
media, in 4.5 (Setting up a link).
"Incoming call" received from a remote device: on receiving a call on one of the connected and
active interfaces, the codec switches to this interface and processes the call.
In a similar way, ending/releasing a link is either initiated by the remote unit (remote release), or by the
operator of the SCOOPY+ S (local release).
3.5.2. Auto-redial feature
When it is necessary to hold the link on permanently, outgoing calls may be backed up by using the
auto-redial function. When it is active and the codec is the initiator of the link, the codec automatically
tries to re-set the link in case of an initial failure, or if an established link is dropped for another reason
than a local release (i.e. hanging up by the user). The redial capability especially applies in the following
cases:
Abnormal loss of the link because of a problem on the network;
Unit switched off or power failure; in such case, after rebooting the codec will automatically
redial and set-up the link back.
Note that, while "auto redial" is active, an established link can be definitively stopped only by
releasing the line on the calling codec side. Otherwise, every time the called party will hang up, the
calling codec will redial and reset the link.
It is possible to program the time period that the unit will wait before redialling after a failed trial, and it
is also possible to program the maximum number of times the codec will redial before giving up.
The activation of this function and the configuration of its parameters can be found in the "Auto Redial"
sub-menu (Tools / Misc / Auto Redial).
3.5.3. GPIO control
The normal operation is via menus and/or remote control. In addition it is possible to assign to the GPIO
functions for partly managing the links thanks to these interfaces: redial last called destination, or
release the line. These capabilities are described in 2.5.5, GPIO.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info