782361
48
Zoom out
Zoom in
Previous page
1/136
Next page
42
SCOOPY+ S - User Manual
3.4. Initial setup of the Ethernet interface
The SCOOPY+ S includes a 100BaseT / 10BaseT Ethernet interface, and the audio transmission can take
place over an IP network through this interface. In addition, it is always possible to use the Ethernet
interface to access the embedded html server.
An initial set up is needed for using one of these features of the Ethernet interface. For setting into
operation, first connect the Ethernet interface to the network, using CAT5 wiring.
Connection to 10BaseT or 100BaseT interfaces are both suitable, as the SCOOPY+ S automatically
switches to the adequate 10 Mbit/s or 100 Mbit/s mode.
"Straightforward" (MDI) patch cables should be used for a connection to a hub or a switch.
Conversely, a "crossed" cable (MDI-X) might be needed for special configurations (e.g. a test
connection to a computer).
As a very first step, the Ethernet interface must be assigned an IP address, and related parameters. This
phase is very simple when a DHCP server is available in the network. The menu to use is reached by
Setup / Network / Ethernet Parameters.
3.4.1. DHCP server available
This is the simplest case, because the server will allocate a suitable IP address and provide the unit the
right settings. Select "DHCP" in the menu (Setup / Network / Ethernet Parameters / Mode). The
unit will then automatically find the DHCP server and automatically set the parameters. You can read
the IP address (allocated to the unit by the DHCP server) in the "About" menu (Tools / About).
Note that, as an additional advantage with DHCP, you do not need to change this setting later, even if
you move the codec to another network, as long as it is still connected to a DHCP server.
3.4.2. "Static" IP configuration
When there is no DHCP server, you have to enter the settings manually. The IP address must be
"available", i.e. not already assigned to other equipment. Ask support from the network administrator(s)
as needed.
First select the manual mode, menu Setup / Network / Ethernet Parameters / Mode / Manual.
Then, still in the menu Setup / Network / Ethernet Parameters, you must enter the following
parameters:
Parameter
Notes
Local IP
Must be unique on the network
Subnet Mask
A typical value is 255.255.255.0
Gateway
DNS Server 1
Domain Name Server (main)
DNS Server 2
Domain Name Server (secondary)
All addresses are in "dot-decimal" format, such as e.g.: 192.168.0.12, 10.0.54.123.
Note: in contrast to the configuration with DHCP, the "static" setting has to be reviewed each time
you move the unit to a new physical site/network, as the previous IP addressing is probably not valid
for the new location.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeta Scoopy plus S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeta Scoopy plus S in the language / languages: English as an attachment in your email.

The manual is 5.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info