618089
27
Zoom out
Zoom in
Previous page
1/100
Next page
27
TO SET - ELAPSED DIVE TIME (EDT) ALARM
(while in the Surface Mode)
Factory set for 0:00 (hr:min), the EDT Alarm can be set to values
between 0:10 and 3:00 (hr:min) in increments of 0:05 (hr:min).
 Depress Both buttons simultaneously, release when SET 1 ap-
pears (2 seconds).
 Press and release the Advance (Front) button, FO2 appears
with the set value flashing.
 Press and release the Advance (Front) button 2 more times.
 The graphic EdT, and Alarm and Dive Time (wave/clock) icons
appear with the Elapsed Dive Time value flashing (Fig. 23).
 Press and release the Select (Side) button until the desired
Alarm value appears, or depress and hold the button to scroll
through the Set Points at a rate of 4 per second.
 Press the Advance (Front) button to accept the setting and ad-
vance to PC Interface, or depress and hold Both buttons for 2
seconds to revert to Surface Mode.
 The unit reverts to Surface Mode in 2 minutes if no button is
pressed.
Fig. 23 - Set Elapsed Time Alarm
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris XR-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris XR-2 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info