618089
25
Zoom out
Zoom in
Previous page
1/100
Next page
25
 If the buttons are held longer and SET 1 and SET 2 are both by-
passed, the unit will go to Simulator (DEMO) Mode which is
described on page 79.
 While in the Set Mode, if neither button is pressed during a pe-
riod of 2 minutes, the unit will revert to Surface Mode.
ENTERING SETTINGS - SET MODE 1
Sequence of the SET 1 Menu
FO2 > Max Depth Alarm > Elapsed Dive Time Alarm > PC
TO SET - FO2 (while in the Surface Mode)
Factory set for AIR, FO2 can also be set to values between 21 and
50% in increments of 1%. FO2 defaults to the AIR setting when-
ever the XR2 shuts off and is reactivated.
 Depress Both buttons simultaneously, release when SET 1 ap-
pears (2 seconds).
 Press and release the Advance (Front) button, FO2 appears with
the value flashing (Fig. 20).
 Press and release the Select (Side) button to increase the FO2
value 1% per second from 21 to 50%, then display AIR again;
or depress and hold the Select (Side) button to scroll from AIR
to 50%, then AIR. The scroll will pause momentarily at 32%
which is considered a commonly used setting.
 For each FO2 numerical value, the Max Depth that can be
achieved for a PO2 of 1.60 ATA (Fig. 21) will be displayed.
Fig. 20 - Set FO2
Fig. 21 - FO2 = 32%
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris XR-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris XR-2 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info