618071
8
Zoom out
Zoom in
Previous page
1/64
Next page
8
A300 CS OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-7287-r04 (8/21/14)
GAS 1 DIVE
PSI
380
5
SURF
0:11
TL
CHANGE
BATTERY
BATT
GAS 1 DIVE
PSI
850
1
SURF
1:03
TL
TMT 1
LOW BATTERY
BATT
POWER SUPPLY
A300 CS Battery >> (1) 3 vdc, CR2, Lithium, 800 mAh - Duracell, Energizer, Panasonic, or RayOvac recommended.
Use life (examples) >> 15 hours at 100% Brightness with Auto Dim set off; 34 hours at 60% Brightness with Auto Dim To
time set for 10 seconds and Dim level set for 10%. Refer to page 62 for more information relating to power usage.
Once a low battery alarm condition occurs (red icon flashing), sufficient time should be available to
ascend to the surface while Brightness is held to 60% maximum.
Transmitter Battery (each) >> (1) 3 vdc, CR2, 800 mAh, Lithium.
Use life >> 300 dive hours if (2) 1 hour dives per dive day.
Replacement >> by user (annual recommended).
POWER SAVER MODE (PSM)
When 2 minutes elapse without any button being pressed while on the surface, the unit will enter a Power Saver Mode (PSM)
which turns the display screen off until a button is pressed at which time it will turn back on.
During the time that the screen is off, all operations continue as normal in the background with current updated information
displayed as soon as the screen comes on again.
An Auto Dim feature can also be used to save power during dives by dimming the display screen to a % level of Brightness that
you set prior to the dives. Refer to pages 13 and 62.
BATTERY STATUS
To access, while viewing the Home Menu when on the surface >>
S (< 2 sec) to access Home Setup Menu, then -
A or M (< 2 sec) until BATT, TMT STATUS is highlighted (Fig. 5).
S (< 2 sec) then activates the unit's receiver, then the Status screen appears (Fig. 6).
Note that a color coded BATT icon is displayed at the upper/left of Surface and Dive Main screens as an indication of status.
Green = good, meaning you have sufficient battery power to conduct normal diving activities.
Yellow = caution (warning), meaning you should have sufficient battery power to complete a normal 1 hour dive.
Red (while on the surface) = alarm, meaning the battery must be changed prior to starting a dive.
Red (during a dive) = alarm, meaning you should savely ascend to the surface and replace the battery before continuing
with diving activities. Caution - The unit may shut off at any time without further warning.
LOW BATTERY WARNING
The BATT icon will change from green to yellow when voltage decreases to 2.75 vdc.
Battery change prior to any diving is recommended. Less than 1 hour dive time may be expected.
The graphics LOW BATTERY will alternate with NORM (or GAUG or FREE) on the Surface Main (Fig. 7).
If a dive is started, the graphic is not displayed on the dive mode screens.
Brightness level will be limited to 60% with other functions continuing as usual.
LOW BATTERY ALARM
The BATT icon will change from yellow to red (flashing) when voltage decreases to 2.50 vdc.
Entry into dive modes and compass use is blocked. Battery change is required prior to starting any dives.
The graphics CHANGE BATTERY will flash on the Surface Main (Fig. 8A) until the battery is changed or the unit shuts off.
If a dive is in progress, the red BATT icon will flash and the graphics GO UP LOW BATTERY will be displayed red with 2 Up
Arrows (Fig. 8B) that will alternate with the usual information displayed until on the surface.
Ascent should be made to the surface following proper ascent protocols (respecting ascent speeds
allowed, and Deco and Safety Stops if possible).
TRANSMITTER (TMT) BATTERY STATUS
Indication is provided only while on the surface.
Low Battery Warning
• The graphics BATT LOW appear solid (yellow) on the Status screen (see Fig. 6).
• DC functions continue to be available (surface and dive).
Low Battery Alarm
• The graphics TMTx LOW BATTERY (red) alternate with the graphics NORM (or GAUG) on the SURF Main screen (Fig. 9).
• The graphics BATT LOW (red) also flash on the Status screen.
• TMT operation continues until Tank Pressure decreases to 50 PSI at which time the TMT's link is lost.
Fig. 5 - HOME SETUP MENU
(to access Battery Status)
Fig. 6 - BATTERY STATUS
Fig. 7 - A300 CS
LOW BATTERY WARNING
Fig. 8A - LOW BATTERY
ALARM (on surface)
SETUP MENU
SET DATE , TIM E
BAT T, TMT STAT US
BLUETOOTH
SET AU TO D I M
BATT, TMT STATUS
A30 0 C S =
TMT
1 =
TMT 2 =
TMT 3 =
TMT
4 =
BAT T G O OD
NOT AVA IL
BAT T LO W
OFF
BAT T G O OD
GAS 1 DIVE
PSI
850
1
SURF
1:03
TL
LOW
BATTERY
BATT
Fig. 9 - TMT LOW BATTERY
ALARM
FT
GAS 1 ATR
PSI
1320 36
64
AR
TL
BATT
GO UP
LO W BAT T E R Y
Fig. 8B - LOW BATTERY
ALARM (during dive)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 CS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 CS in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info