618070
39
Zoom out
Zoom in
Previous page
1/52
Next page
39
A300 AI OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-7265-r01 (12/28/11)
DECLINATION
Magnetic Declination is taken from numbers provided on maps or charts that apply to a specific location.
The numbers represent the easterly or westerly angular difference (Declination) in degrees between magnetic North and true
(geometric or polar) North.
A Compass will point to magnetic North unless its reference is adjusted to true North prior to conducting activities.
Declination Menu, information includes (Fig. 95) -
> Graphics SEt and MENU, with graphic selections -
> OFF.
> DECLIN EAST + .
> DECLIN WEST - .
A (< 2 sec) to step forward (down) through Menu selections.
M (< 2 sec) to step back (up) through Menu selections.
S (< 2 sec) when the pointer icon ( > ) is next a selection to select it.
> If OFF is selected, Declination is set for 0° and operation reverts to the Compass Menu.
> If DECLIN EAST (or WEST) is selected, that graphic will flash and the numeric value with ° icon will flash in place of the
graphic MENU (Fig. 96).
A (< 2 sec) to increase Set Points one at a time from 0 to 45° in increments of 1°.
A (hold) to increase Set Points at a rate of 4 per second.
M (< 2 sec) to decrease Set Points one at a time.
S (< 2 sec) to save the Set Point and revert to the Set Declination Menu.
ALARMS
When most Alarms strike, operation in Compass Mode will be terminated and the Dive Main will be displayed indicating the
alarm condition. Compass Mode can then be reentered by pressing S (2 sec).
During several types of alarms, indication will be given while remaining in Compass Mode without interruption. They are -
Ascent Alarm (Fig. 97) -
> VARI, all segments flash, and the message TOO FAST is displayed, until ascent rate is slowed.
Depth Alarm (Fig. 98) -
> Depth digits flash, and the message TOO DEEP is displayed, until ascent above the alarm depth set.
Fig. 95 - SET DECLINATION
MENU
Fig. 96 - SET DECLIN
Fig. 97 - ASCENT ALARM
Fig. 98 - DEPTH ALARM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 AI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 AI in the language / languages: English as an attachment in your email.

The manual is 11,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info