618070

Aeris A300 AI Manual

26
Zoom out
Zoom in
Previous page
1/52
Next page
26
A300 AI OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-7265-r01 (12/28/11)
CONDITIONAL VIOLATION (CV)
Upon ascent above the required Deco Stop Depth, operation will enter CV during which no off gassing credit will be given,
meaning Deco Stop Time and TAT will not decrease.
The Audible will sound during which the alarm LED will flash. A Down Arrow will also flash (Fig. 51) until descent is made to
below the required Stop Depth, then it is removed.
• S (< 2 sec) to silence Audible.
> Other button operations and displays are similar to Deco.
If descent below the required Deco Stop Depth is made within 5 minutes, operation will resume in Deco with off gassing credit
given (Stop Time and TAT will decrease).
DELAYED VIOLATION 1 (DV1)
Once above the Deco Stop Depth for more than 5 minutes, operation will enter DV1 which is a continuation of CV**.
**The difference between DV1 and CV is that DV1 causes operation to enter Violation Gauge Mode 5 minutes after surfacing
from that dive.
The Audible will sound during which the alarm LED and full TLBG will flash. Two Down Arrows will flash (Fig. 52) until descent is
made to below the required Stop Depth.
> Button operations and displays are similar to Deco.
When descent below the required Deco Stop Depth is made, operation will resume in Deco with off gassing credit given (Stop
Time and TAT decrease).
DELAYED VIOLATION 2 (DV2)
If the calculated Deco obligation requires a Stop Depth between 60 FT (18 M) and 70 FT (21 M), operation will enter DV2.
Upon entry into DV2**, the Audible will sound during which the alarm LED and full TLBG will flash. Two Up Arrows will also
flash until within 10 FT (3 M) of and below the required Stop Depth of 60 FT (18 M).
**The difference between DV2 and general Deco is that DV2 causes operation to enter Violation Gauge Mode 5 minutes after
surfacing from that dive.
> Once within 10 FT (3 M) of and below the required Stop Depth, the full Stop icon (smaller Up and Down Arrows with Stop
Bar) will be displayed solid (Fig. 53).
> Button operations and displays are similar to Deco.
DELAYED VIOLATION 3 (DV3)
Upon descent deeper than the MOD**, the Audible will sound during which the alarm LED will flash. Two Up Arrows and the
loaded segments of the TLBG will also flash, and Current Depth and Max Depth will only indicate 3 dashes ( - - - ).
**MOD is the Max Operating Depth at which the A300 AI can accurately perform calculations and display data.
MOD = 330 FT (99.9 M) in NORM mode.
MOD = 399 FT (120 M) in GAUG mode.
Upon ascending above the MOD, Current Depth will be restored, however, Max Depth will display 3 dashes for the remainder
of that dive. Also, the Log for that dive will display 3 dashes as the Max Depth.
DV3 MAIN, information includes (Fig. 54) -
> Current Depth as 3 dashes ( - - - ) with FT (or M) icon.
> Nx, (PZ+), CF icons - if they apply.
> (2) Up Arrows flashing, until at/above MOD.
> DTR as 3 dashes ( - - - ) with graphic NDC.
> Pressure with PSI (or BAR) icon, when using Gas 1; or graphic SPG if 2, 3, or 4.
> Graphic GAS1 (or 2, 3, 4), one in use.
> ATR (up to 199 min) with icons, when using Gas 1; dashes if Gas 2, 3, or 4.
> TLBG. loaded segments flashing for the remainder of that dive.
> VARI, while ascending.
• A (< 2 sec) to access ALTs, similar to No Deco.
• M (2 sec) to access Gas Switching*.
• S (< 2 sec) to activate Backlight and acknowledge other type alarms.
• S (2 sec) to access Compass*.
*These items can only be accessed while viewing the Main.
Fig. 51 - CV MAIN
Fig. 52 - DV1 MAIN
(during Audible)
Fig. 53 - DV2 MAIN
Fig. 54 - DV3 MAIN
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 AI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 AI in the language / languages: English as an attachment in your email.

The manual is 11,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info