618070
25
Zoom out
Zoom in
Previous page
1/52
Next page
25
A300 AI OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-7265-r01 (12/28/11)
DECOMPRESSION
Decompression mode activates when theoretical No Decompression time and depth limits are exceeded.
Upon entry into Deco, the Audible will sound during which the alarm LED and full TLBG will flash. Two Up Arrows will also flash
(Fig. 46), until within 10 FT (3 M) of and below the required Stop Depth (the Stop Zone).
• S (< 2 sec) to silence the Audible.
> Once within 10 FT (3 M) of and below the required Stop Depth (in the Stop Zone), the full Stop icon (smaller Up and Down
Arrows with Stop Bar) will be displayed solid.
Managing Deco Stops
To fulfill your decompression obligation, you should make a safe controlled Ascent to a depth slightly deeper than, or equal to,
the required Stop Depth indicated and decompress for the Stop Time indicated.
The amount of decompression credit time that you receive is dependent on Depth, with slightly less credit given the deeper you
are below the Stop Depth indicated.
You should stay slightly deeper than the required Stop Depth indicated until the next shallower Stop Depth appears. Then, you
can slowly ascend to, but not shallower than that indicated Stop Depth.
DECO STOP MAIN, information includes (Fig. 47) -
> Current Depth with FT (or M) icon.
> Nx, (PZ+), CF icons - if they apply.
> Graphic DECO STOP with Stop icon (arrows and bar).
> Stop Depth with graphic FT (or M) and Stop Time (up to 199 min) with graphic MIN.
> Pressure with PSI (or BAR) icon, when using Gas 1; or graphic SPG if 2, 3, or 4.
> Graphic GAS1 (or 2, 3, 4), one in use.
> ATR (up to 199 min) with icons, when using Gas 1; dashes if Gas 2, 3, or 4.
> Full TLBG.
> VARI, if ascending.
A (< 2 sec) to access ALTs.
M (2 sec) to access Gas Switching*.
S (< 2 sec) to activate Backlight and acknowledge alarms.
S (2 sec) to access Compass*.
*These items can only be accessed while viewing the Main.
DECO STOP ALT 1, information includes (Fig. 48) -
> Graphic ALt.
> Time of Day (hr:min) with graphic A (or P) if 12 Hour.
> Temperature with ° icon and graphic F (or C).
A (< 2 sec) to access ALT 2.
Revert to Main in 5 sec, if A is not pressed.
DECO STOP ALT 2, information includes (Fig. 49) -
> Graphic ALt.
> Max Depth with graphic FT (or M) MAX.
> EDT (min) with graphic.
> Total Ascent Time with TAT and min icons, displays 199 when => 199 min.
A (< 2 sec) to access ALT 3 if Nx, or revert to Main if Air.
Revert to Main in 5 sec, if A is not pressed.
DECO STOP ALT 3, information includes (Fig. 50) -
> Graphic ALt with Nx icon.
> %O2 accumulated with graphic O2SAT.
> PO2 value (x.xx ATA) with icon.
> Graphic GAS 1 (or 2, 3, 4), one in use.
> FO2 with icon, value set for Gas in use.
5 sec or A (< 2 sec), revert to Main.
Fig. 46 - DECO ENTRY
Fig. 47 - DECO STOP MAIN
Fig. 48 - DECO STOP ALT 1
Fig. 50 - DECO STOP ALT 3
Fig. 49 - DECO STOP ALT 2
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 AI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 AI in the language / languages: English as an attachment in your email.

The manual is 11,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info