Manual AEG WSP 600 HF (page 27 of 60) (English, German, Dutch, French)

464373

Zoom out

Zoom in

1/60

For the Fitter

2.3.4 Electrical Connection

The storage heater appliance is connected to a load current (OFF-PEAK tariff) and control cables

for the room thermostat and for the charge control (A1/Z1; A2/Z2). The cables A1/Z1 and A2/Z2

are at line-voltage 230V~ and may thus be run together with a L/N/PE cable for the room

thermostat. The heater is suitable for direct connection without a spur, or with a wall socket.

According to regulations every branch circuit must be individually protected, for instance by

circuit breakers for all phases. These circuit breakers must have contact openings of at least

3 mm.

Each heater must be connected to a separate current carrying cable from the electrical

junction box. Running the load current cable from heater to heater is not allowed.

Since the technical connection conditions stipulated by the power supply companies permit a

1-phase connection of up to 2 kW only, the appliance must always be connected to 3 phases.

When connecting to a charge control with a so-called "single-wire control", bridge the

terminals “A2/Z2” and “N”.

Make sure the earth wire is correctly and firmly attached.

2.3.5 Cable Feed

Fig. 9

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG WSP 600 HF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG WSP 600 HF Manual

Product: