464373
24
Zoom out
Zoom in
Previous page
1/60
Next page
24
For the Fitter
Fig. 2 Opening the heater
Fig. 3 Wall-fixing screw
2.3.1 Heater Assembly
Opening the heater (Fig. 2):
1. Prise off the plastic caps and remove the
screws.
2. Pull the side panels at the front outwards
and remove them backwards.
3. Lift the top panel (A) approx. 10mm.
4. Pull the top panel forwards.
5. Lift off the top panel.
6. Pull the rear top panel (B) forwards.
7. Lift off the rear top panel.
Remove the insulation, packaging and assembly
material in the top of the heaters.
Place the heater in its final position.
Align the fixing screw in its final position on the
right or left hand inner panel and fix it firmly to
the wall.
The wall fastening must be fixed to the heater
with a self-tapping screw (permanent
connection).
2.3 Assembly and Electrical Connection
The heater should be only removed from its packaging near to its place of final assembly. Small
cracks or chips in the heater core bricks have no influence on the operation of the heater.
5.
B
A
4.
3.
1.
2.
1.
7.
6.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WSP 600 HF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WSP 600 HF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info